900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




NXP Semiconductors Electronic Components Datasheet

K32L3A60VPJ1AT Datasheet

Microcontroller

No Preview Available !

NXP Semiconductors
Data Sheet: Technical Data
Document Number: K32L3A
Rev. 1, 09/2019
K32L3A
72 MHz Arm® Cortex®-M0+/M4F Dual Core Microcontroller
with up to 1280 KB Flash and 384 KB SRAM
The K32L3A family of devices is an ultra-low-power, dual core
solution ideal for applications that require a high performance
Cortex-M4F processor to run the application and an efficient
Cortex-M0+ to run low power operations such as sensor data
collection and perform low level operations that don't need the
full power of the M4 core.
K32L3A60VPJ1AT
176 VFBGA
9 x 9 x 1 mm Pitch 0.5 mm
Core Processor
• Arm Cortex-M4F core up to 72 MHz (high-speed run up to
72 MHz) for application code
• Arm Cortex-M0+ core up to 72 MHz (high-speed run up to
72 MHz) for low power operations
Memories
• 1.25 MB program flash memory, 1 MB on the M4F domain
and 256 KB on the M0+ domain
• 384 KB SRAM, 256 KB on the M4F domain and 128 KB on
the M0+ domain
• 48 KB ROM with built-in bootloader
• 32 B system register file and 32 B RTC register file
• External bus interface (FlexBUS) for off-chip memory
expansion
Clocks
• Low-Power Frequency-Locked Loop (LPFLL)
• Range 1: 48 MHz
• Range 2: 72 MHz
• Internal Resistance-Capacitance Oscillators (IRCs)
• Fast-Speed IRC (48, 52, 56, 60 MHz)
• Slow-Speed IRC (8 MHz or 2 MHz)
• Low Power Oscillator (LPO - 1 kHz)
• Real Time Clock Oscillator (RTCOSC)
• System Clock Generation
System
• Dual Direct Memory Access (DMA) controllers with
asynchronous capability
• M4F: 16 channels, 64 inputs per channel
• M0+: 8 channels, 32 inputs per channel
Timers
• 2 x 6 ch., 2 x 2 ch. Timer PWM Modules (TPM)
• 2 x 4 ch. Low Power Programmable Interrupt
Timer (LPIT)
• 3 Low Power Timer (LPTMR)
• Real Time Clock (RTC)
• One 56-bit Time stamp
Security and Integrity
• 80-bit unique identification number per chip
• Advanced Flash security and access control
• 16-bit or 32-bit Hardware CRC with
programmable generator polynomial
• Low-power Cryptographic Acceleration Unit
(CAU3) supporting AES128/196/256, DES/
3DES, SHA 256, RSA and ECC PK-256/
Curve25519
• True Random Number Generator
• Up to 4 active anti-tamper detection pins
Analog
• 1 x 12-bit single ended low-power ADC
• 2 x Low power comparator (LPCMP) each
containing a 6-bit DAC and programmable
reference input
• 1 x 12-bit low power digital-to-analog converter
(LPDAC)
• 1 x 1.2V/2.1V dual-range VREF
Peripherals
• 1 x Universal Serial Bus (USB) 2.0 Full Speed
(FS) controller with integrated hardware
transceiver, 5 V regulator and 2 KB USB RAM
NXP reserves the right to change the production detail specifications as may be
required to permit improvements in the design of its products.


NXP Semiconductors Electronic Components Datasheet

K32L3A60VPJ1AT Datasheet

Microcontroller

No Preview Available !

• Two internal Watchdog and one external Watchdog Monitor
• 1 x 32 ch. FlexIO supporting emulation of
• Low-leakage wakeup unit
UART, I2C, SPI, I2S, Camera IF, LCD RGB,
• JTAG and Serial Wire Debug, version 2.0, programming and
PWM/Waveform generation
debug interface with multi-drop capability
• 4 x low power UART (LPUART)
• Trace Features for M4F
• 4 x low power I2C (LPI2C) modules supporting
• Cross Trigger Interface
up to 1 Mbps
• Embedded Trace Macrocell
• 4 x 16-bit low power SPI (LPSPI) supporting
• Trace Port Interface Unit
up to 24 Mbps
• Trace Features for M0+
• 1 x EMVSIM module supporting supporting
• Cross Trigger Interface
ISO-7816 protocol
• Micro Trace Buffer
• 1 x Serial Audio Interface (SAI) with support for
• Breakpoint and Watchpoint Unit
I2S and AC'97
• Nested Vectored Interrupt Controller
• 1 x Secure Digital Hardware Controller
• Memory Protection Unit
(uSDHC)
• Extended Resource Domain Controller
I/O
Power Management
• 104 General-purpose input/output pins (GPIO)
• Bypass mode: 1.71 V to 3.6 V
• Buck DC-DC converter: 2.1 V to 3.6 V
Packages
• Core voltage bypass: 1.14 V to 1.45 V direct supply to core,
• 176 VFBGA 9mm x 9mm x 0.86mm, 0.5mm
bypassing internal regulator
pitch, -40 °C to 105 °C
• Independent VDDIO1 and VDDIO2 supply: 1.71 V to 3.6 V
• Independent VBAT(RTC): 1.71 V to 3.6 V
Type
Selector Guide
Reference Manual
Data Sheet
Chip Errata
Package drawing
Related resources
Description
The NXP Solution Advisor is a web-based tool that features interactive application wizards and a
dynamic product selector.
The Reference Manual contains a comprehensive description of the structure and function
(operation) of a device.
The Data Sheet includes electrical characteristics and signal connections.
The chip mask set Errata provides additional or corrective information for a particular device mask
set.
Package dimensions are provided in package drawings.
2
NXP Semiconductors
K32L3A, Rev. 1, 09/2019


Part Number K32L3A60VPJ1AT
Description Microcontroller
Maker NXP
Total Page 3 Pages
PDF Download

K32L3A60VPJ1AT Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 K32L3A60VPJ1AT Microcontroller
NXP





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy