LM111FE Overview
The LM111 series are voltage parators that have input currents approximately a hundred times lower than devices like the µA710. They are designed to operate over a wider range of supply voltages; from standard ±15V op amp supplies down to a single 3V supply. Their output is patible with RTL, DTL, and TTL as well as MOS circuits. Further, they can drive lamps or relays, switching voltages up to 50V at currents as high as 50mA. Both the inputs and the outputs of the LM111 series can be isolated from system ground, and the output can drive loads referred to ground, the positive supply, or the negative supply. Offset balancing and strobe capability are provided and outputs can be wire-ORed. Although slower than the µA710 (200ns response time vs 40ns), the devices are also much less prone to spurious oscillations. The LM111 series has the same
LM111FE Key Features
- Operates from single 3V supply (LM311B)
- Maximum input bias current: 150nA (LM311-250nA)
- Maximum offset current: 20nA (LM311-50nA)
- Differential input voltage range: ±30V
- Power consumption: 135mW at ±15V
- High sensitivity-200V/mV
- Zero crossing detector
