LM239 Datasheet | NXP Semiconductors

DESCRIPTION The LM139 series consists of four independent precision voltage parators, with an offset voltage specification as low as 2.0m V max for each parator, which were designed specifically to operate from a single power supply over a wide range of voltages. Operation from split power supplies is also possible and the low power supply current drain is independent of the magnitude of the power supply voltage. These parators also have a unique characteristic in that the input mon- mode voltage range includes ground, even though they are operated from a single power supply voltage. The LM139 series was designed to directly interface with TTL and CMOS. When operated from both plus and minus power supplies, the LM139 series will directly interface with MOS logic where their low power drain is a distinct advantage over standard parators. PIN CONFIGURATION D, F, N Packages OUTPUT 2 OUTPUT 1 V+ INPUT 1 - INPUT 1 + INPUT 1 - INPUT 1 + 1 2 3 1 4 5 6 7 2 3 4 11 10 9 8 INPUT 4 + INPUT 4 - INPUT 3 + INPUT 3 - 14 13 12 OUTPUT 3 OUTPUT 4 GND TOP VIEW Features SL00070 - Wide single supply voltage range 2.0VDC to 36VDC or dual - Very low supply current drain (0.8m A) independent of supply - Low input biasing current 25n A - Low input offset current ±5n A and offset voltage - Input mon- mode voltage range includes ground - Differential input voltage range equal to the power supply voltage - Low output 250m V at 4m A saturation voltage - Output voltage patible with TTL, DTL, ECL, MOS and CMOS logic systems voltage (1.0m W/parator at 5.0VDC) supplies ±1.0VDC to ±18VDC Figure 1. Pin Configuration EQUIVALENT CIRCUIT V+ 3.5µA 100µA 3.5µA 100µA Q2 Q3 Q4 OUTPUT +...