LM75B Description
The LM75B is a temperature-to-digital converter using an on-chip band gap temperature sensor and Sigma-Delta A-to-D conversion technique with an overtemperature detection output. The LM75B contains a number of data registers: Configuration register (Conf) to store the device settings such as device operation mode, OS operation mode, OS polarity and OS fault queue as described in Section 7 “Functional description”;.
LM75B Key Features
- Pin-for-pin replacement for industry standard LM75 and LM75A and offers improved temperature resolution of 0.125 C and
- I2C-bus interface with up to 8 devices on the same bus
- Power supply range from 2.8 V to 5.5 V
- Temperatures range from 55 C to +125 C
- Frequency range 20 Hz to 400 kHz with bus fault time-out to prevent hanging up the bus
LM75B Applications
- Pin-for-pin replacement for industry standard LM75 and LM75A and offers improved temperature resolution of 0.125 C and specification of a single part over powe
- I2C-bus interface with up to 8 devices on the same bus
- Power supply range from 2.8 V to 5.5 V
- Temperatures range from 55 C to +125 C
- Frequency range 20 Hz to 400 kHz with bus fault time-out to prevent hanging up the bus