Datasheet4U Logo Datasheet4U.com

MC15XS3400 - Quad high-side switch

Description

24 6.1 Introduction

Features

  • Four protected 15 mΩ high-side switches (at 25 °C).
  • Operating voltage range of 6.0 V to 20 V with standby current < 5.0 μA, extended mode from 4.0 V to 28 V.
  • 8.0 MHz 16-bit 3.3 V and 5.0 V SPI control and status reporting with daisy chain capability.
  • PWM module using external clock or calibratable internal oscillator with programmable outputs delay management.
  • Smart overcurrent shutdown, severe short-circuit, overtemperature protection with time limi.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MC1500 (MC1500 / MC1400) Laser Trimmed Silicon Monolithic Integrated Circuit Motorola
MC1500A (MC1500 / MC1400) Laser Trimmed Silicon Monolithic Integrated Circuit Motorola
MC1502 Double Balanced Mixer Cougar Components
MC1504 Voltage Reference Motorola
MC1504A Voltage Reference Motorola

Other Datasheets by NXP Semiconductors

Part Number Description
MC1508-8 (MC1508-8 / MC1408-8) 8-Bit Multiplying D/A Converter
MC1596 Balanced mudulator/demodulator
MC10XS4200 Dual 24V 10mOhm high-side switch
MC12148 LOW POWER VOLTAGE CONTROLLED OSCILLATOR
MC12XSFD3 high-side switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NXP Semiconductors Technical Data Quad high-side switch (quad 15 mOhm) The 15XS3400 is one in a family of devices designed for low-voltage automotive lighting applications. Its four low RDS(on) MOSFETs (quad 15 mOhm) can control four separate 55 W/28 W bulbs, and/or Xenon modules, and/or LEDs. Programming, control and diagnostics are accomplished using a 16-bit SPI interface. Its output with selectable slew rate improves electromagnetic compatibility (EMC) behavior. Additionally, each output has its own parallel input or SPI control for pulsewidth modulation (PWM) control. The 15XS3400 allows the user to program via the SPI the fault current trip levels and duration of acceptable lamp inrush. The device has Fail-safe mode to provide functionality of the outputs in case of MCU damage.
Published: |