Datasheet4U Logo Datasheet4U.com

MFRC530 Datasheet Standard Mifare Reader Solution

Manufacturer: NXP Semiconductors

Overview: MFRC530 Standard MIFARE reader solution Rev. 3.4 — 12 February 2014 057434 Product data sheet PANY PUBLIC 1. Introduction This data sheet describes the functionality of the MFRC530 Integrated Circuit (IC). It includes the functional and electrical specifications and from a system and hardware viewpoint gives detailed information on how to design-in the device. Remark: The MFRC530 supports all variants of the MIFARE Classic, MIFARE 1K and MIFARE 4K RF identification protocols. To aid readability throughout this data sheet, the MIFARE Classic, MIFARE 1K and MIFARE 4K products and protocols have the generic name MIFARE. 2.

General Description

The MFRC530 is highly integrated reader IC for contactless munication at 13.56 MHz.

The MFRC530 reader IC provides: • outstanding modulation and demodulation for passive contactless munication • a wide range of methods and protocols • pin patibility with the CLRC632, MFRC500, MFRC531 and SLRC400 All protocol layers of the ISO/IEC 14443 A are supported The receiver module provides a robust and efficient demodulation/decoding circuitry implementation for patible transponder signals (see Section 9.10 on page 31).

The digital module, manages the plete ISO/IEC 14443 A standard framing and error detection (parity and CRC).

Key Features

  • 3.1 General.
  • Highly integrated analog circuitry for demodulating and decoding card response.
  • Buffered output drivers enable antenna connection using the minimum of external components.
  • Proximity operating distance up to 100 mm.
  • Supports the ISO/IEC 14443 A standard, parts 1 to 4.
  • Supports MIFARE dual-interface card ICs and MIFARE Classic protocol.
  • Crypto1 and secure non-volatile internal key memory.
  • Pin-compatible with the CLRC632, MFRC500, MFRC531 and the SLRC.

MFRC530 Distributor