MK64FN1M0VLL12 Datasheet | NXP Semiconductors

NXP Semiconductors Data Sheet: Technical Data K64P144M120SF5 Rev. 7, 11/2016 Kinetis K64F Sub-Family Data Sheet 120 MHz ARM® Cortex®-M4-based Microcontroller with FPU The K64 product family members are optimized for cost-sensitive applications requiring low-power, USB/Ethernet connectivity, and up to 256 KB of embedded SRAM. These devices share the prehensive enablement and scalability of the Kinetis family. This product offers: - Run power consumption down to 250 μA/MHz. Static power consumption down to 5.8 μA with full state retention and 5 μs wakeup. Lowest Static mode down to 339 n A - USB LS/FS OTG 2.0 with embedded 3.3 V, 120 m A LDO Vreg, with USB device crystal-less operation - 10/100 Mbit/s Ethernet MAC with MII and RMII interfaces MK64FN1M0Vxx12 MK64FX512Vxx12 121 XFBGA 144 LQFP 8 x 8 x 0.5 mm Pitch 20 x 20 x 1.6 mm Pitch 0.65 mm 0.5 mm 144 MAPBGA 13 x 13 x 1.46 mm Pitch 1 mm 100 QFP 14 x 14 x 1.7 mm Pitch 0.5 mm Performance - Up to 120 MHz ARM® Cortex®-M4 core with DSP instructions and floating point unit Memories and memory interfaces - Up to 1 MB program flash memory and 256 KB RAM - Upto 128 KB Flex NVM and 4 KB Flex RAM on devices with Flex Memory - Flex Bus external bus interface munication interfaces - Ethernet controller with MII and RMII interface - USB full-/low-speed On-the-Go controller - Controller Area Network (CAN) module - Three SPI modules - Three I2C modules. Support for up to 1 Mbit/s - Six UART modules - Secure Digital Host Controller (SDHC) - I2S module System peripherals - Multiple low-power modes, low-leakage wake-up unit - Memory protection unit with multi-master protection - 16-channel DMA controller - External watchdog monitor and software watchdog Security and integrity modules - Hardware CRC...