MKE06P80M48SF0 Datasheet | NXP Semiconductors

NXP Semiconductors Data Sheet: Technical Data Document Number MKE06P80M48SF0 Rev. 6, 04/2020 KE06 Sub-Family Data Sheet Supports the following: MKE06Z64VLD4(R), MKE06Z128VLD4(R), MKE06Z64VQH4(R), MKE06Z128VQH4(R), MKE06Z64VLH4(R), MKE06Z128VLH4(R), MKE06Z64VLK4(R), and MKE06Z128VLK4(R) Key Features - Operating characteristics - Voltage range: 2.7 to 5.5 V - Flash write voltage range: 2.7 to 5.5 V - Temperature range (ambient): -40 to 105°C - Performance - Up to 48 MHz Arm® Cortex-M0+ core - Single cycle 32-bit x 32-bit multiplier - Single cycle I/O access port - Memories and memory interfaces - Up to 128 KB flash - Up to 16 KB RAM - Clocks - Oscillator (OSC) - supports 32.768 k Hz crystal or 4 MHz to 24 MHz crystal or ceramic resonator; choice of low power or high gain oscillators - Internal clock source (ICS) - internal FLL with internal or external reference, 37.5 k Hz pre-trimmed internal reference for 48 MHz system clock - Internal 1 k Hz low-power oscillator (LPO) - System peripherals - Power management module (PMC) with three power modes: Run, Wait, Stop - Low-voltage detection (LVD) with reset or interrupt, selectable trip points - Watchdog with independent clock source (WDOG) - Programmable cyclic redundancy check module (CRC) - Serial wire debug interface (SWD) - Aliased SRAM bitband region (BIT-BAND) - Bit manipulation engine...