MKE15Z256VLH7 Datasheet | NXP Semiconductors

features , KE1x Z extends Kinetis E family to higher performance and broader scalability. Robust TSI provides highlevel stability and accuracy to customer's HMI system. 1 Msps ADC and Flex Timer help build a perfect solution for BLDC motor control systems. MKE1x Z256VLL7 MKE1x Z256VLH7 MKE1x Z128VLL7 MKE1x Z128VLH7 100 LQFP (LL) 64 LQFP (LH) 14x14x1.4 mm P 0.5 10x10x1.4 mm P 0.5 Core Processor and System - ARM® Cortex®-M0+ core, supports up to 72 MHz frequency - ARM Core based on the ARMv6 Architecture and Thumb®-2 ISA - Configurable Nested Vectored Interrupt Controller (NVIC) - Memory-Mapped Divide and Square Root module (MMDVSQ) - 8-channel DMA controller extended up to 63 channels with DMAMUX Reliability, safety and security - Flash Access Control (FAC) - Cyclic Redundancy Check (CRC) generator module - 128-bit unique identification (ID) number - Internal watchdog (WDOG) with independent clock source - External watchdog monitor (EWM) module - ADC self calibration feature - On-chip clock loss monitoring Human-machine interface (HMI) - Supports up to 32 interrupt request (IRQ) sources - Up to 89 GPIO pins with interrupt functionality - Touch sensing input (TSI) module Memory and memory interfaces - Up to 256 KB program flash - Up to 32 KB SRAM - 32 KB Flex NVM for data flash and with EEPROM emulation - 2 KB Flex RAM for EEPROM emulation - 128 Bytes flash cache - Boot ROM with built in bootloader Mixed-signal analog - 2× 12-bit analog-to-digital converter (ADC) with up to 16 channel analog inputs per module, up to 1 Msps - 2× high-speed analog parators (CMP) with internal 8-bit digital to analog converter (DAC); the 8-bit DAC of CMP0 supports an output option to pad with a buffer Timing and control - 3× Flex Timers (FTM) for PWM generation, offering up to 8 standard channels - 1× 16-bit Low-Power Timer (LPTMR) with flexible wake up control - 1× Programmable Delay Block (PDB) with flexible trigger system - 1× 32-bit Low-power Periodic Interrupt Timer (LPIT) with 4...