MKV31F128VLH10 Datasheet | NXP Semiconductors

features include: - Dual 16-bit ADCs sampling at up to 1.2 MS/s in 12-bit mode - 12 channels of highly flexible motor-control timers (PWMs) across three independent time bases - Large RAM block enabling local execution of fast control loops at full clock speed 100 LQFP (LL) 64 LQFP (LH) 14 x 14 x 1.4 Pitch 0.5 10 x 10 x 1.4 Pitch 0.5 mm mm Performance - 100 MHz ARM Cortex-M4 core with DSP instructions delivering 1.25 Dhrystone MIPS per MHz Memories and memory interfaces - 128 KB of embedded flash and 24 KB of RAM - Pre-programmed Kinetis flashloader for one-time, insystem factory programming System peripherals - 4-channel DMA controller - Independent External and Software Watchdog monitor Clocks - One crystal oscillator with two ranges: 32-40 k Hz or 3-32 MHz - Three internal oscillators: 32 k Hz, 4 MHz, and 48 MHz - Multi-purpose clock generator with FLL Security and integrity modules - Hardware CRC module - 128-bit unique identification (ID) number per chip - Flash access control to protect proprietary software Analog modules - Two 16-bit SAR ADCs (1.2 MS/s in 12bit mode) - One 12-bit DAC - Two analog parators (CMP) with 6-bit DAC - Accurate internal voltage reference munication interfaces - Two SPI modules - Three UART modules and one low-power UART - Two I2C: Support for up to 1 Mbps operation Timers - One 8-channel motor-control general-purpose/PWM timer - Two 2-channel motor-control general-purpose timers with quadrature decoder functionality Operating Characteristics - Voltage range (including flash writes): 1.71 to 3.6 V - Temperature range (ambient): -40 to 105°C Human-machine interface - Up to 70 general-purpose I/O (GPIO) NXP reserves the right to change the production detail specifications as may be required to permit improvements in the design of its...