900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




NXP Semiconductors Electronic Components Datasheet

MPXV5050VC6T1 Datasheet

High Temperature Accuracy Integrated Silicon Pressure Sensor

No Preview Available !

NXP Semiconductors
Pressure
MPXV5050VC6T1
Rev 3, 12/2018
High Temperature Accuracy
Integrated Silicon Pressure Sensor for
Measuring Vacuum/Gauge Pressure,
On-Chip Signal Conditioned,
Temperature Compensated and
Calibrated
MPXV5050V
Series
-50 to 0 kPa (-7.25 to 0 psi)
0.1 to 4.6 V Output
The MPXV5050V series sensor integrates on-chip, bipolar op amp circuitry and
thin film resistor networks to provide a high output signal and temperature
compensation. The small form factor and high reliability of on-chip integration
make the NXP Semiconductor pressure sensor a logical and economical choice
for the system designer.
The MPXV5050V series piezoresistive transducer is a state-of-the-art,
monolithic, signal conditioned, silicon pressure sensor. This sensor combines
advanced micromachining techniques, thin film metallization, and bipolar
semiconductor processing to provide an accurate, high level analog output signal
that is proportional to applied pressure.
Features
Application Examples
• Vacuum Pump Monitoring
• 2.5% Maximum Error over 0° to 85°C
• Ideally suited for Microprocessor or Microcontroller-Based Systems
• Temperature Compensated from Over -40° to +125°C
• Patented Silicon Shear Stress Strain Gauge
• Durable Thermoplastic (PPS) Surface Mount Package
• Easy-to-Use Chip Carrier Option
• Ideal for Automotive and Non-Automotive Applications
Device Name
Small Outline Package
MPXV5050VC6T1
Case
No.
482A
None
ORDERING INFORMATION
# of Ports
Single
Dual
Gauge
Pressure Type
Differential
Absolute
Vacuum/Gauge
Device
Marking
MPXV5050V
SMALL OUTLINE PACKAGE
MPXV5050VC6T1
CASE 482A-01
© NXP B.V., 2005-2018. All rights reserved.


NXP Semiconductors Electronic Components Datasheet

MPXV5050VC6T1 Datasheet

High Temperature Accuracy Integrated Silicon Pressure Sensor

No Preview Available !

Pressure
Operating Characteristics
Table 1. Operating Characteristics (VS = 5.0 Vdc, TA = 25°C unless otherwise noted, P1 > P2)
Characteristic
Symbol
Min
Typ
Max
Unit
Pressure Range
Supply Voltage(1)
POP
-50
0
kPa
VS
4.75
5.0
5.25
Vdc
Supply Current
Full Scale Output(2)
@ VS = 5.0 Volts
Full Scale Span(3)
@ VS = 5.0 Volts
Accuracy(4)
Sensitivity
Io
7.0
10
mAdc
(0 to 85°C)
VFSO
4.488
4.6
4.713
Vdc
(0 to 85°C)
VFSS
4.5
Vdc
(0 to 85°C)
V/P
±2.5
%VFSS
90
mV/kPa
Response Time(5)
tR
1.0
ms
Warm-Up Time(6)
20
ms
Offset Stability(7)
± 0.5
%VFSS
Pressure Offset(8)
(0 to 85°C)
Voff
0
0.100
0.213
Vdc
1. Device is ratiometric within this specified excitation range.
2. Full Scale Output (VFSO) is defined as the output voltage at the maximum or full rated pressure.
3. Full Scale Span (VFSS) is defined as the algebraic difference between the output voltage at full rated pressure and the output voltage at the
minimum rated pressure.
4. Accuracy is the deviation in actual output from nominal output over the entire pressure range and temperature range as a percent of span
at 25°C due to all sources of error including the following:
Linearity: Output deviation from a straight line relationship with pressure over the specified pressure range.
Temperature Hysteresis: Output deviation at any temperature within the operating temperature range, after the temperature is cycled to and
from the minimum or maximum operating temperature points, with zero differential pressure applied.
Pressure Hysteresis: Output deviation at any pressure within the specified range, when this pressure is cycled to and from minimum or
maximum rated pressure at 25°C.
TcSpan: Output deviation over the temperature range of 0° to 85°C, relative to 25°C.
TcOffset: Output deviation with minimum pressure applied, over the temperature range of 0° to 85°C, relative to 25°C.
5. Response Time is defined as the time for the incremental change in the output to go from 10% to 90% of its final value when subjected to a
specified step change in pressure.
6. Warm-up Time is defined as the time required for the product to meet the specified output voltage after the pressure has been stabilized.
7. Offset Stability is the product's output deviation when subjected to 1000 cycles of Pulsed Pressure, Temperature Cycling with Bias Test.
8. Offset (Voff) is defined as the output voltage at the minimum rated pressure.
MPXV5050VC6T1
2
Sensors
NXP B.V.


Part Number MPXV5050VC6T1
Description High Temperature Accuracy Integrated Silicon Pressure Sensor
Maker NXP
Total Page 3 Pages
PDF Download

MPXV5050VC6T1 Datasheet PDF

View PDF for Mobile






Similar Datasheet

1 MPXV5050VC6T1 High Temperature Accuracy Integrated Silicon Pressure Sensor
NXP





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy