MWCT2014S Datasheet | NXP Semiconductors

MWCT2xxx S MWCT2xxx S Data Sheet Supports MWCT2D17S and MWCT2016S. Data is preliminary for MWCT2015S and MWCT2014S Rev. 2 - 02/2023 Data Sheet: Product Preview - Operating characteristics - Voltage range: 2.97 V to 5.5 V - Ambient temperature range: -40 °C to 125 °C for all power modes - Arm™ Cortex-M7 core, 32-bit CPU - M7 supports up to 160 MHz frequency with 2.14 DMIPS / MHz - Arm Core based on the Armv7 and Thumb®-2 ISA - Integrated Digital Signal Processor (DSP) - Configurable Nested Vectored Interrupt Controller (NVIC) - Single Precision Floating Point Unit (FPU) - Clock interfaces - 8 - 40 MHz Fast External Oscillator (FXOSC) - 48 MHz Fast Internal RC oscillator (FIRC) - 32 k Hz Low Power Oscillator (SIRC) - 32 k Hz Slow External Oscillator (SXOSC) - System Phased Lock Loop (SPLL) - I/O and package - LQFP48, MAXQFP100, MAXQFP172 - Up to 32-channel DMA with up to 128 request sources using DMAMUX - Memory and memory interfaces - Up to 4 MB program flash memory with ECC - Up to 128 K of flexible program or data flash memory - Up to 512 KB SRAM with ECC, includes 192 KB of TCM RAM ensuring maximum CPU performance of fast control loops with minimal latency - Data and instruction cache for each core to minimize performance impact of memory access latencies - Quad SPI support - Mixed-signal analog - Up to three 12-bit Analog-to-Digital Converters (ADC) with up to 24 channel analog inputs per module - One Temperature Sensor (Temp Sense) - Up to three Analog parators (CMP), with each parator having an internal 8-bit DAC - Human-Machine Interface (HMI) - Non-Maskable Interrupt (NMI) - Up to 60 pins with wakeup capability - Up to 32 pins with interrupt...