NBP8 Datasheet | NXP Semiconductors

description The NBP8 family is a fully integrated battery pressure monitoring sensor (BPMS). The NBP8 BPMS solution integrates an 8-bit central processing unit (CPU) running on factory-embedded firmware with serial data interface to create the ready-to-use battery pressure monitor sensor. The NBP8 includes unique autonomous features such as periodic data management with host notification, pressure change detection with host wake up, and self-test. The NBP8 is packaged in a small 4 mm x 4 mm x 1.98 mm wettable-flank QFN, and is qualified to AEC-Q100 grade 1 and MSL 3 classifications. 2 Features and benefits - Transducer measurement interfaces with low-power AFE: - 10-bit pensated pressure sense element - 8-bit pensated internal device temperature measurement - 8-bit pensated internal device voltage measurement - 12-entry pressure FIFO - Selectable host wake-up indications: - fixed pressure threshold - relative pressure threshold - pressure rate of change threshold - Client SPI to support host access to internal peripherals, registers, and memory - Qualified in pliance with AEC-Q100, Rev. H - User-selectable sampling interval - Low-voltage detection 3 Ordering information Table 1. Ordering information Type number Package Name Description VSON plastic thermal enhanced quad flat package; no leads, 0.1 dimple wettable flank; 24 terminals; 0.5 mm pitch, 4 mm x 4 mm x 1.98 mm body Version SOT1931-1(D) Table 2. Ordering options Part Number Pressure Range NBP8FD4T1 40 k Pa to 250 k Pa Pressure tolerances Standard tolerances NXP Semiconductors Battery pressure monitor sensor 4 Block diagram Figure 1 presents the main blocks of the device and their signal interactions. Power management controls and bus control signals are not shown in this block diagram for clarity. BDM Controller Interrupt Controller PTA0 - 4 PTB0 - 1 Pad...