Datasheet4U Logo Datasheet4U.com

NTB0104 - Dual supply translating transceiver

General Description

The NTB0104 is a 4-bit, dual supply translating transceiver with auto direction sensing, that enables bidirectional voltage level translation.

Key Features

  • Wide supply voltage range:.
  • VCC(A): 1.2 V to 3.6 V and VCC(B): 1.65 V to 5.5 V.
  • IOFF circuitry provides partial Power-down mode operation.
  • Inputs accept voltages up to 5.5 V.
  • ESD protection:.
  • HBM JESD22-A114E Class 2 exceeds 2500 V for A port.
  • HBM JESD22-A114E Class 3B exceeds 15000 V for B port.
  • MM JESD22-A115-A exceeds 200 V.
  • CDM JESD22-C101E exceeds 1500 V (For NTB0104UK 1000 V).
  • Latch-up performance exceeds 100 mA per JESD 78B Class II.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NTB011N15MC N-Channel MOSFET ON Semiconductor
NTB004N10G 100V 201A N-Channel Power MOSFET ON Semiconductor
NTB082N65S3F Power MOSFET ON Semiconductor
NTB082N65S3F N-Channel MOSFET INCHANGE
NTB10N40 Power MOSFET ON Semiconductor

Other Datasheets by NXP Semiconductors

Part Number Description
NTB0104-Q100 Dual supply translating transceiver
NTB0101 Dual supply translating transceiver
NTB0101A Auto direction sensing dual supply
NTB0102 Dual supply translating transceiver
NTB0102-Q100 Dual supply translating transceiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NTB0104 Dual supply translating transceiver; auto direction sensing; 3-state Rev. 3 — 10 November 2011 Product data sheet 1. General description The NTB0104 is a 4-bit, dual supply translating transceiver with auto direction sensing, that enables bidirectional voltage level translation. It features two 4-bit input-output ports (An and Bn), one output enable input (OE) and two supply pins (VCC(A) and VCC(B)). VCC(A) can be supplied at any voltage between 1.2 V and 3.6 V and VCC(B) can be supplied at any voltage between 1.65 V and 5.5 V, making the device suitable for translating between any of the low voltage nodes (1.2 V, 1.5 V, 1.8 V, 2.5 V, 3.3 V and 5.0 V). Pins An and OE are referenced to VCC(A) and pins Bn are referenced to VCC(B).