Datasheet4U Logo Datasheet4U.com

NTS0103 - Dual supply translating transceiver

General Description

The NTS0103 is a 3-bit, dual supply translating transceiver with auto direction sensing, that enables bidirectional voltage level translation.

Key Features

  • Wide supply voltage range:.
  • VCC(A): 1.65 V to 3.6 V and VCC(B): 2.3 V to 5.5 V.
  • Maximum data rates:.
  • Push-pull: 50 Mbps.
  • IOFF circuitry provides partial Power-down mode operation.
  • Inputs accept voltages up to 5.5 V.
  • ESD protection:.
  • HBM JESD22-A114E Class 2 exceeds 2500 V for A port.
  • HBM JESD22-A114E Class 3B exceeds 8000 V for B port.
  • MM JESD22-A115-A exceeds 200 V.
  • CDM JESD22-C101E exceeds 1500 V.
  • IEC61000-4-2 contact discharge excee.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NTS0104 Dual supply translating transceiver NXP Semiconductors
NTS-3000 Network Time Synchronisation USER MANUAL ELPROMA
NTS10100EMFS Very Low Leakage Trench-based Schottky Rectifier ON Semiconductor
NTS10100EMFST1G Very Low Leakage Trench-based Schottky Rectifier ON Semiconductor
NTS10100EMFST3G Very Low Leakage Trench-based Schottky Rectifier ON Semiconductor

Other Datasheets by NXP Semiconductors

Part Number Description
NTS0101 Dual supply translating transceiver
NTS0102 Dual supply translating transceiver
NTS0102-Q100 Dual supply translating transceiver
NTS0104-Q100 Dual supply translating transceiver
NTS0302 2-bit dual supply translating transceiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NTS0103 Dual supply translating transceiver; open drain; auto direction sensing Rev. 2 — 10 November 2011 Product data sheet 1. General description The NTS0103 is a 3-bit, dual supply translating transceiver with auto direction sensing, that enables bidirectional voltage level translation. It features two 3-bit input-output ports (An and Bn), one output enable input (OE) and two supply pins (VCC(A) and VCC(B)). VCC(A) can be supplied at any voltage between 1.65 V and 3.6 V and VCC(B) can be supplied at any voltage between 2.3 V and 5.5 V, making the device suitable for translating between any of the voltage nodes (1.8 V, 2.5 V, 3.3 V and 5.0 V). Pins An and OE are referenced to VCC(A) and pins Bn are referenced to VCC(B).