Datasheet4U Logo Datasheet4U.com

NX20P3483UK - high voltage sink/source combo switch

General Description

The NX20P3483UK is a product with combined multiple power switches and an LDO for USB PD application.

Key Features

  • Wide supply voltage range for VBUS from 2.8V to 20V.
  • System power supply V5V from 4.0V to 5.5V.
  • Chip power supply VDD from 2.7V to 5.5V.
  • VBUS to VCHG Switch.
  • 28mī—ī€ (typical) ultra low ON resistance.
  • ISW maximum 5A continuous current.
  • Bidirectional operation: 20V sink switch from VBUS to VCHG with RCP and 6V source switch from VCHG to VBUS with overcurrent limit.
  • Adjustable overcurrent limit for source configuration from 400mA to 3.4A by I2C-bus interface.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NX2016SF Crystal Units NDK
NX2113 300kHz & 600kHz SYNCHRONOUS PWM CONTROLLER Microsemi
NX2113A 300kHz & 600kHz SYNCHRONOUS PWM CONTROLLER Microsemi
NX2114 300kHz & 600kHz SYNCHRONOUS PWM CONTROLLER Microsemi
NX2114 300kHz & 600kHz SYNCHRONOUS PWM CONTROLLER NEXSEM

Other Datasheets by NXP Semiconductors

Part Number Description
NX20P0407 CC and SBU Protection
NX20P0408 USB D+/D- protection
NX20P0477 USB Type-C CC smart protection
NX20P5090 High voltage USB PD power switch
NX2020N2 N-channel Trench MOSFET

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NX20P3483UK USB PD and Type-C high voltage sink/source combo switch with protection Rev. 2 — 4 March 2019 Product short data sheet 1. General description The NX20P3483UK is a product with combined multiple power switches and an LDO for USB PD application. The device includes a bidirectional high voltage power switch which supports both 20V sink and 6V source; a 5V power switch for source and a 100mA LDO provides power supply for dead battery operation. The high voltage power switch has 29V DC tolerance, and is able to sink up to 5A at maximum of 20V and source up to 3.4A at maximum of 6V. When it is configured as a high voltage sink switch, the path has overvoltage protection and reverse current protection features.