Datasheet4U Logo Datasheet4U.com

NX3L2T384 Datasheet Dual low-ohmic single-pole single-throw analog switch

Manufacturer: NXP Semiconductors

📥 Download Datasheet

General Description

The NX3L2T384 is a dual low-ohmic single-pole single-throw analog switch.

Each switch has two input/output terminals (nY and nZ) and an active LOW enable input (nE).

When pin nE is HIGH, the analog switch is turned off.

Overview

NX3L2T384 Dual low-ohmic single-pole single-throw analog switch Rev.

5 — 8 February 2013 Product data sheet 1.

Key Features

  • Wide supply voltage range from 1.4 V to 4.3 V.
  • Very low ON resistance (peak):.
  • 1.6  (typical) at VCC = 1.4 V.
  • 1.0  (typical) at VCC = 1.65 V.
  • 0.55  (typical) at VCC = 2.3 V.
  • 0.50  (typical) at VCC = 2.7 V.
  • 0.50  (typical) at VCC = 4.3 V.
  • High noise immunity.
  • ESD protection:.
  • HBM JESD22-A114F Class 3A exceeds 7500 V.
  • MM JESD22-A115-A exceeds 200 V.
  • CDM AEC-Q100-011 revision B exceeds 1000 V.
  • IEC61000-4-2 contact discharge exce.

More Datasheets from NXP Semiconductors

Part Number Description
NX3L2267 Low-ohmic dual single-pole double-throw analog switch
NX3L2267S Low-ohmic dual single-pole double-throw analog switch
NX3L2467 Double-pole Double-throw Analog Switch
NX3L2G66 Dual low-ohmic single-pole single-throw analog switch
NX3L1G3157-Q100 Low-ohmic single-pole double-throw analog switch
NX3L1G384 Low-ohmic single-pole single-throw analog switch
NX3L1G53 Low-ohmic Single-pole Double-throw Analog Switch
NX3L1G66-Q100 Low-ohmic single-pole single-throw analog switch
NX3L1T384 Single-pole Single-throw Analog Switch
NX3L1T53 Low-ohmic Single-pole Double-throw Analog Switch