PCA9675D
PCA9675D is Remote 16-bit I/O expander manufactured by NXP Semiconductors.
- Part of the PCA9675 comparator family.
- Part of the PCA9675 comparator family.
description
The PCA9675 provides general purpose remote I/O expansion for most microcontroller families via the two-line bidirectional bus (I2C-bus) and is a part of the Fast-mode Plus family.
The PCA9675 is a drop in upgrade for the PCF8575 providing higher Fast-mode Plus (Fm+) I2C-bus speeds (1 MHz versus 400 k Hz) so that the output can support PWM dimming of LEDs, higher I2C-bus drive (30 m A versus 3 m A) so that many more devices can be on the bus without the need for bus buffers, higher total package sink capacity (400 m A versus 100 m A) that supports having all 25 m A LEDs on at the same time and more device addresses (64 versus 8) are available to allow many more devices on the bus without address conflicts.
The device consists of a 16-bit quasi-bidirectional port and an I2C-bus interface. The PCA9675 has a low current consumption and includes latched outputs with high current drive capability for directly driving LEDs.
It also possesses an interrupt line (INT) which can be connected to the interrupt logic of the microcontroller. By sending an interrupt signal on this line, the remote I/O can inform the microcontroller if there is ining data on its ports without having to municate via the I2C-bus. The internal Power-On Reset (POR) or software reset sequence initializes the I/Os as inputs.
2. Features and benefits
- 1 MHz I2C-bus interface
- pliant with the I2C-bus Fast and Standard modes
- SDA with 30 m A sink capability for 4000 p F buses
- 2.3 V to 5.5 V operation with 5.5 V tolerant I/Os
- 16-bit remote I/O pins that default to inputs at power-up
- Latched outputs with 25 m A sink capability for directly driving LEDs
- Total package sink capability of 400 m A
- Active LOW open-drain interrupt output
- 64 programmable slave addresses using 3 address pins
- Readable device ID (manufacturer, device type, and revision)
- Low standby current
- - 40 C to +85 C operation
- ESD protection exceeds 2000 V HBM per JESD22-A114 and 1000 V CDM per
JESD22-C101
- Latch-up...