Datasheet4U Logo Datasheet4U.com

PCA9848 - 8-channel ultra-low voltage Fm+ I2C-bus switch

General Description

The PCA9848 is an ultra-low voltage, octal bidirectional translating switch controlled via the I2C-bus.

The SCL/ SDA upstream pair fans out to eight downstream pairs, or channels.

Any or all SCx/SDx channels can be selected, determined by the programmable control register.

Key Features

  • Ultra-low voltage operation, down to 0.8 V to interface with next-generation CPUs.
  • 1-of-8 bidirectional translating switch.
  • Fm+ I2C-bus interface logic; compatible with SMBus standards.
  • Active LOW reset input.
  • Two address pins allow up to 16 devices on the I2C-bus.
  • Channel selection via I2C-bus.
  • Power-up with all switch channels deselected.
  • Low Ron switches.
  • Allows voltage level translation between 0.8 V, 1.8 V, 2.

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
PCA9848 8-channel ultra-low voltage, Fm+ I2C-bus switch with reset Rev. 2.0 — 16 May 2023 Product data sheet 1 General description The PCA9848 is an ultra-low voltage, octal bidirectional translating switch controlled via the I2C-bus. The SCL/ SDA upstream pair fans out to eight downstream pairs, or channels. Any or all SCx/SDx channels can be selected, determined by the programmable control register. This feature allows multiple devices with the same I2C-bus address to reside on the same bus. The switch device can also separate a heavily loaded I2C-bus into separate bus segments, eliminating the need for a bus buffer. An active LOW reset input allows the PCA9848 to recover from a situation where one of the downstream I2Cbuses is stuck in a LOW state.