Datasheet4U Logo Datasheet4U.com

PCA9849 - 4-channel ultra-low voltage Fm+ I2C-bus multiplexer

General Description

The PCA9849 is an ultra-low voltage, quad bidirectional translating multiplexer controlled via the I2C-bus.

The SCL/SDA upstream pair fans out to four downstream pairs, or channels.

A single SCx/SDx channel can be selected, determined by the programmable control register.

Key Features

  • Ultra-low voltage operation, down to 0.8 V to interface with next-generation CPUs.
  • 1-of-4 bidirectional translating multiplexer.
  • Fm+ I2C-bus interface logic; compatible with SMBus standards.
  • Active LOW reset input.
  • 2 address pins allowing up to 16 devices on the I2C-bus.
  • Channel selection via I2C-bus.
  • Power-up with all switch channels deselected.
  • Low Ron switches.
  • Allows voltage level translation between 0.8 V, 1.8 V, 2.5 V and 3.3 V buses.
  • Rese.

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
PCA9849 4-channel ultra-low voltage, Fm+ I2C-bus multiplexer with reset Rev. 1 — 16 November 2015 Product data sheet 1. General description The PCA9849 is an ultra-low voltage, quad bidirectional translating multiplexer controlled via the I2C-bus. The SCL/SDA upstream pair fans out to four downstream pairs, or channels. A single SCx/SDx channel can be selected, determined by the programmable control register. This feature allows multiple devices with the same I2C-bus address to reside on the same bus. The multiplexer device can also separate a heavily loaded I2C-bus into separate bus segments, eliminating the need for a bus buffer. An active LOW reset input allows the PCA9849 to recover from a situation where one of the downstream I2C-buses is stuck in a LOW state.