900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




NXP Semiconductors Electronic Components Datasheet

PTN36001 Datasheet

SuperSpeed USB3.0 redriver

No Preview Available !

PTN36001
SuperSpeed USB 3.0 redriver
Rev. 1.1 — 16 August 2016
Product data sheet
1. General description
PTN36001 is a small, low power SuperSpeed USB 3.0 redriver IC that enhances signal
quality by performing receive equalization on the deteriorated input signal followed by
transmit de-emphasis maximizing system link performance for mobile applications. With
its superior differential signal conditioning and enhancement capability, the device delivers
significant flexibility and performance scaling for various systems with different PCB trace
and cable channel conditions.
PTN36001 is a dual-channel device that supports data signaling rate of 5 Gbit/s through
each channel. The data flow of one channel is facing the USB host, and another channel
is facing the USB peripheral or device. Each channel consists of a high-speed Transmit
(Tx) differential lane and a high-speed Receive (Rx) differential lane.
PTN36001 is powered from a 1.8 V supply and is available in a small X2QFN12 package
(1.25 mm 2.1 mm 0.35 mm) with 0.4 mm pitch.
2. Features and benefits
Supports USB 3.0 specification (SuperSpeed only)
Compliant to SuperSpeed USB 3.0 standard
Support of two channels
Two control pins to select optimized signal conditions
Receive equalization on each channel to recover from InterSymbol Interference
(ISI) and high-frequency losses, with provision to choose equalization gain settings
per channel
Transmit de-emphasis on each channel delivers pre-compensation suited to
channel conditions
Output swing adjustment
Integrated termination resistors provide impedance matching on both transmit and
receive sides
Automatic receiver termination detection
Low active power: 200 mW/111 mA (typical) for VDD = 1.8 V


NXP Semiconductors Electronic Components Datasheet

PTN36001 Datasheet

SuperSpeed USB3.0 redriver

No Preview Available !

NXP Semiconductors
PTN36001
SuperSpeed USB 3.0 redriver
Power-saving states:
5.4 mW/3 mA (typical) when in U2/U3 states
3.6 mW/2 mA (typical) when no connection detected
10.8 W/6 A (typical) when in Deep power-saving state
Excellent differential and common return loss performance
10 dB differential and 10 dB common-mode return loss for 10 MHz to 1250 MHz
Flow-through pinout to ease PCB layout and minimize crosstalk effects
Hot Plug capable
Power supply: VDD = 1.8 V (typical)
Compliant with JESD 78 Class II
Very thin X2QFN12 package: 1.25 mm 2.1 mm 0.35 mm, 0.4 mm pitch
ESD protection exceeds 7000 V HBM per JDS-001-2012 and 1000 V CDM per
JESD22-C101
Latch-up testing is done to JEDEC Standard JESD78 which exceeds 100 mA
Operating temperature range: 0 C to 85 C
3. Applications
Laptops, tablets
Active cables
Notebook/netbook/nettop platforms
Docking stations and AIO platforms
USB 3.0 peripherals such as flat panel display, consumer/storage devices, printers or
USB 3.0 capable hubs/repeaters
4. System context diagrams
Figure 1 illustrates PTN36001 usage.
PTN36001
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1.1 — 16 August 2016
© NXP Semiconductors N.V. 2016. All rights reserved.
2 of 31


Part Number PTN36001
Description SuperSpeed USB3.0 redriver
Maker NXP
Total Page 3 Pages
PDF Download

PTN36001 Datasheet PDF

View PDF for Mobile






Similar Datasheet

1 PTN36001 SuperSpeed USB3.0 redriver
NXP





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy