900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




NXP Semiconductors Electronic Components Datasheet

PTN36241G Datasheet

SuperSpeed USB3.0 redriver

No Preview Available !

PTN36241G
SuperSpeed USB 3.0 redriver
Rev. 1.1 — 9 August 2016
Product data sheet
1. General description
PTN36241G is a very small, low power SuperSpeed USB 3.0 redriver IC that enhances
signal quality by performing receive equalization on the deteriorated input signal followed
by transmit de-emphasis maximizing system link performance for mobile applications.
With its superior differential signal conditioning and enhancement capability, the device
delivers significant flexibility and performance scaling for various systems with different
PCB trace and cable channel conditions and still benefit from optimum power
consumption.
PTN36241G is a dual-channel device that supports data signaling rate of 5 Gbit/s through
each channel. The data flow of one channel is facing the USB host, and another channel
is facing the USB peripheral or device. Each channel consists of a high-speed Transmit
(Tx) differential lane and a high-speed Receive (Rx) differential lane.
PTN36241G has built-in advanced power management capability that enables significant
power savings under various different USB 3.0 Low-power modes (U2/U3). It can detect
link electrical conditions and can dynamically activate/de-activate internal circuitry and
logic. The device performs these actions without host software intervention and conserves
power.
PTN36241G is powered from a 1.8 V supply and is available in a small X2QFN12
package (1.25 mm 2.1 mm 0.35 mm) with 0.4 mm pitch.
2. Features and benefits
Supports USB 3.0 specification (SuperSpeed only)
Compliant to SuperSpeed USB 3.0 standard
Support of two channels
Pin out data flow matches USB 3.0 Micro-AB/Micro-B receptacle pin assignments
Two control pins to select optimized signal conditions
Receive equalization on each channel to recover from InterSymbol Interference
(ISI) and high-frequency losses, with provision to choose equalization gain settings
per channel
Transmit de-emphasis on each channel delivers pre-compensation suited to
channel conditions
Output swing adjustment
Integrated termination resistors provide impedance matching on both transmit and
receive sides
Automatic receiver termination detection
Low active power: 189 mW/105 mA (typical) for VDD = 1.8 V


NXP Semiconductors Electronic Components Datasheet

PTN36241G Datasheet

SuperSpeed USB3.0 redriver

No Preview Available !

NXP Semiconductors
PTN36241G
SuperSpeed USB 3.0 redriver
Power-saving states:
1.8 mW/1 mA (typical) when in U2/U3 states
0.9 mW/0.5 mA (typical) when no connection detected
3.6 W/2 A (typical) when in Deep power-saving state
Excellent differential and common return loss performance
14 dB differential and 15 dB common-mode return loss for 10 MHz to 1250 MHz
Flow-through pinout to ease PCB layout and minimize crosstalk effects
Hot Plug capable
Power supply: VDD = 1.8 V (typical)
Compliant with JESD 78 Class II
Very thin X2QFN12 package: 1.25 mm 2.1 mm 0.35 mm, 0.4 mm pitch
ESD protection exceeds 7000 V HBM per JDS-001-2012 and 1000 V CDM per
JESD22-C101
Latch-up testing is done to JEDEC Standard JESD78 which exceeds 100 mA
Operating temperature range: 40 C to 85 C
3. Applications
Smart phones, tablets
Active cables
Notebook/netbook/nettop platforms
Docking stations and AIO platforms
USB 3.0 peripherals such as flat panel display, consumer/storage devices, printers or
USB 3.0 capable hubs/repeaters
4. System context diagrams
Figure 1 illustrates PTN36241G usage.
PTN36241G
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1.1 — 9 August 2016
© NXP Semiconductors N.V. 2016. All rights reserved.
2 of 31


Part Number PTN36241G
Description SuperSpeed USB3.0 redriver
Maker NXP
Total Page 3 Pages
PDF Download

PTN36241G Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 PTN36241B SuperSpeed USB3.0 redriver
NXP
2 PTN36241G SuperSpeed USB3.0 redriver
NXP





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy