Datasheet4U Logo Datasheet4U.com

PTN5150A - CC logic

General Description

PTN5150A is a small thin low power CC Logic chip supporting the USB Type-C connector application with Configuration Channel (CC) control logic detection and indication functions.

Key Features

  • Support type C connector with existing chipsets.
  • USB Type-C Rev 1.1 compliance.
  • Compatible with legacy OTG hardware and software.
  • Support plug, orientation, role and charging current detection.
  • USB-ID pin for OTG.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
PTN0402 Commercial Thin Film Chip Resistor Vishay
PTN04050A POSITIVE-TO-NEGATIVE CONVERTER Texas Instruments
PTN04050C WIDE OUTPUT ADJUSTABLE BOOST CONVERTER Texas Instruments
PTN0502 Commercial Thin Film Chip Resistor Vishay
PTN0505 Commercial Thin Film Chip Resistor Vishay

Other Datasheets by NXP Semiconductors

Part Number Description
PTN5150 CC logic
PTN5100 PHY/protocol
PTN5100D PHY/protocol
PTN5110 USB PD TCPC PHY
PTN1111 1:10 PECL clock distribution device

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
PTN5150A CC logic for USB Type-C applications Rev. 1 — 9 December 2016 Product data sheet 1. General description PTN5150A is a small thin low power CC Logic chip supporting the USB Type-C connector application with Configuration Channel (CC) control logic detection and indication functions. The features of PTN5150A enable USB Type-C connector to be used in both host and device ends of the Type-C cable. It can support Type-C to USB legacy cables and adapters defined in USB Type-C Spec. PTN5150A can work autonomously, or can connect to a controller through I2C-bus interface. PTN5150A can be configured to dual role, host, or device mode through external configuration pin or through I2C interface.