900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




NXP Semiconductors Electronic Components Datasheet

S9KEAZ128ACLK Datasheet

32-bit MCU

No Preview Available !

NXP Semiconductors
Data Sheet: Technical Data
KEA128 Sub-Family Data
Sheet
Supports the following:
S9KEAZ64AMLK(R),
S9KEAZ128AMLK(R),
S9KEAZ64AVLK(R),
S9KEAZ128AVLK(R),
S9KEAZ64ACLK(R),
S9KEAZ128ACLK(R),
S9KEAZ64AMLH(R),
S9KEAZ128AMLH(R),
S9KEAZ64AVLH(R),
S9KEAZ128AVLH(R),
S9KEAZ64ACLH(R) and
S9KEAZ128ACLH(R)
Key features
• Operating characteristics
– Voltage range: 2.7 to 5.5 V
– Flash write voltage range: 2.7 to 5.5 V
– Temperature range (ambient): -40 to 125°C
• Performance
– Up to 48 MHz Arm® Cortex-M0+ core
– Single cycle 32-bit x 32-bit multiplier
– Single cycle I/O access port
• Memories and memory interfaces
– Up to 128 KB flash
– Up to 16 KB RAM
• Clocks
– Oscillator (OSC) - supports 32.768 kHz crystal or 4
MHz to 24 MHz crystal or ceramic resonator; choice
of low power or high gain oscillators
– Internal clock source (ICS) - internal FLL with
internal or external reference, 37.5 kHz pre-trimmed
internal reference for 48 MHz system clock
– Internal 1 kHz low-power oscillator (LPO)
Document Number S9KEA128P80M48SF0
Rev. 5, 09/2019
S9KEA128P80M48SF0
• System peripherals
– Power management module (PMC) with three power
modes: Run, Wait, Stop
– Low-voltage detection (LVD) with reset or interrupt,
selectable trip points
– Watchdog with independent clock source (WDOG)
– Programmable cyclic redundancy check module
(CRC)
– Serial wire debug interface (SWD)
– Aliased SRAM bitband region (BIT-BAND)
– Bit manipulation engine (BME)
• Security and integrity modules
– 80-bit unique identification (ID) number per chip
• Human-machine interface
– Up to 57 general-purpose input/output (GPIO)
– Up to 37 general-purpose input/output (GPIO)
– Up to 22 general-purpose input/output (GPIO)
– Up to 14 general-purpose input/output (GPIO)
– Up to 71 general-purpose input/output (GPIO)
– Two 32-bit keyboard interrupt modules (KBI)
– External interrupt (IRQ)
NXP reserves the right to change the production detail specifications as may be
required to permit improvements in the design of its products.


NXP Semiconductors Electronic Components Datasheet

S9KEAZ128ACLK Datasheet

32-bit MCU

No Preview Available !

• Analog modules
– One up to 16-channel 12-bit SAR ADC, operation in Stop mode, optional hardware trigger (ADC)
– Two analog comparators containing a 6-bit DAC and programmable reference input (ACMP)
• Timers
– One 6-channel FlexTimer/PWM (FTM)
– Two 2-channel FlexTimer/PWM (FTM)
– One 2-channel periodic interrupt timer (PIT)
– One pulse width timer (PWT)
– One real-time clock (RTC)
• Communication interfaces
– Two SPI modules (SPI)
– Up to three UART modules (UART)
– Two I2C modules (I2C)
– One MSCAN module (MSCAN)
• Package options
– 80-pin LQFP
– 64-pin LQFP
KEA128 Sub-Family Data Sheet, Rev. 5, 09/2019
2 NXP Semiconductors


Part Number S9KEAZ128ACLK
Description 32-bit MCU
Maker NXP
PDF Download

S9KEAZ128ACLK Datasheet PDF






Similar Datasheet

1 S9KEAZ128ACLH 32-bit MCU
NXP
2 S9KEAZ128ACLK 32-bit MCU
NXP





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy