900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




NXP Semiconductors Electronic Components Datasheet

S9KEAZN8AMTG Datasheet

32-bit MCU

No Preview Available !

NXP Semiconductors
Data Sheet: Technical Data
Document Number S9KEA8P44M48SF0
Rev. 5, 10/2019
KEA8 Sub-Family Data Sheet
Supports the following:
S9KEAZN8ACTG(R),
S9KEAZN8ACFK(R),
S9KEAZN8AMTG(R) and
S9KEAZN8AMFK(R)
Key features
• Operating characteristics
– Voltage range: 2.7 to 5.5 V
– Flash write voltage range: 2.7 to 5.5 V
– Temperature range (ambient): -40 to 125°C
• Performance
– Up to 48 MHz Arm® Cortex-M0+ core
– Single cycle 32-bit x 32-bit multiplier
– Single cycle I/O access port
• Memories and memory interfaces
– Up to 8 KB flash
– Up to 1 KB RAM
• Clocks
– Oscillator (OSC) - supports 32.768 kHz crystal or 4
MHz to 24 MHz crystal or ceramic resonator; choice
of low power or high gain oscillators
– Internal clock source (ICS) - internal FLL with
internal or external reference, 37.5 kHz pre-trimmed
internal reference for 48 MHz system clock
– Internal 1 kHz low-power oscillator (LPO)
• System peripherals
– Power management module (PMC) with three power
modes: Run, Wait, Stop
– Low-voltage detection (LVD) with reset or interrupt,
selectable trip points
– Watchdog with independent clock source (WDOG)
– Programmable cyclic redundancy check module
(CRC)
– Serial wire debug interface (SWD)
– Aliased SRAM bitband region (BIT-BAND)
– Bit manipulation engine (BME)
S9KEA8P44M48SF0
• Security and integrity modules
– 80-bit unique identification (ID) number per chip
• Human-machine interface
– Up to 57 general-purpose input/output (GPIO)
– Up to 37 general-purpose input/output (GPIO)
– Up to 22 general-purpose input/output (GPIO)
– Up to 14 general-purpose input/output (GPIO)
– Two up to 8-bit keyboard interrupt modules (KBI)
– External interrupt (IRQ)
• Analog modules
– One 12-channel 12-bit SAR ADC, operation in Stop
mode, optional hardware trigger (ADC)
– Two analog comparators containing a 6-bit DAC
and programmable reference input (ACMP)
• Timers
– One 6-channel FlexTimer/PWM (FTM)
– One 2-channel FlexTimer/PWM (FTM)
– One 2-channel periodic interrupt timer (PIT)
– One pulse width timer (PWT)
– One real-time clock (RTC)
• Communication interfaces
– One SPI module (SPI)
– One UART module (UART)
– One I2C module (I2C)
• Package options
– 24-pin QFN
– 16-pin TSSOP
NXP reserves the right to change the production detail specifications as may be
required to permit improvements in the design of its products.


NXP Semiconductors Electronic Components Datasheet

S9KEAZN8AMTG Datasheet

32-bit MCU

No Preview Available !

Table of Contents
1 Ordering parts.......................................................................................3
4.2.2 FTM module timing....................................................... 15
1.1 Determining valid orderable parts............................................... 3
4.3 Thermal specifications................................................................. 16
2 Part identification................................................................................. 3
4.3.1 Thermal characteristics.................................................. 16
2.1 Description...................................................................................3
5 Peripheral operating requirements and behaviors................................ 17
2.2 Format.......................................................................................... 3
5.1 Core modules............................................................................... 17
2.3 Fields............................................................................................3
5.1.1 SWD electricals .............................................................18
2.4 Example....................................................................................... 4
5.2 External oscillator (OSC) and ICS characteristics.......................19
3 Ratings..................................................................................................4
5.3 NVM specifications..................................................................... 21
3.1 Thermal handling ratings............................................................. 4
5.4 Analog..........................................................................................22
3.2 Moisture handling ratings............................................................ 4
5.4.1 ADC characteristics....................................................... 22
3.3 ESD handling ratings................................................................... 5
5.4.2 Analog comparator (ACMP) electricals.........................24
3.4 Voltage and current operating ratings..........................................5
5.5 Communication interfaces........................................................... 25
4 General................................................................................................. 6
5.5.1 SPI switching specifications.......................................... 25
4.1 Nonswitching electrical specifications........................................ 6
6 Dimensions...........................................................................................28
4.1.1 DC characteristics.......................................................... 6
6.1 Obtaining package dimensions.................................................... 28
4.1.2 Supply current characteristics........................................ 12
7 Pinout................................................................................................... 28
4.1.3 EMC performance..........................................................14
7.1 Signal multiplexing and pin assignments.................................... 28
4.2 Switching specifications.............................................................. 14
8 Revision History...................................................................................29
4.2.1 Control timing................................................................ 14
KEA8 Sub-Family Data Sheet, Rev. 5, 10/2019
2 NXP Semiconductors


Part Number S9KEAZN8AMTG
Description 32-bit MCU
Maker NXP
PDF Download

S9KEAZN8AMTG Datasheet PDF






Similar Datasheet

1 S9KEAZN8AMTG 32-bit MCU
NXP





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy