SA630 Description
The SA630 is a wideband RF switch fabricated in BiCMOS technology and incorporating on-chip CMOS/TTL patible drivers. Its primary function is to switch signals in the frequency range DC to 1 GHz from one 50 channel to another. The switch is activated by a CMOS/TTL patible signal applied to the enable channel 1 pin (ENCH1).
SA630 Key Features
- Wideband (DC to 1 GHz)
- Low through loss (1 dB typical at 200 MHz)
- Unused input is terminated internally in 50
- Excellent overload capability (1 dB gain pression point +18 dBm at 300 MHz)
- Low DC power (170 A from 5 V supply)
- Fast switching (20 ns typical)
- Good isolation (off channel isolation 60 dB at 100 MHz)
- Low distortion (IP3 intercept +33 dBm)
- Good 50 match (return loss 18 dB at 400 MHz)
- Full ESD protection
SA630 Applications
- Wideband (DC to 1 GHz)