900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




NXP Semiconductors Electronic Components Datasheet

SL3S1013 Datasheet

UCODE G2iM

No Preview Available !

SL3S1003_1013
UCODE G2iM and G2iM+
Rev. 3.8 — 5 February 2019
201238
Product data sheet
COMPANY PUBLIC
1 General description
NXP’s UCODE G2iM series transponder ICs offers in addition to the leading-edge read
range features such as a Tag Tamper Alarm, Data Transfer, Digital Switch, advanced
privacy-protection modes and a 640 bit configurable User Memory.
Very high chip sensitivity (-17.5 dBm) enables longer read ranges with simple, single-
port antenna designs. In fashion and retail the UCODE G2iM series improve read rates
and provide for theft deterrence. In the electronic device market, they are ideally suited
for device configuration, activation, production control and PCB tagging. In authentication
applications, they protect brands and guard against counterfeiting. They can also be
used to tag containers, electronic vehicles, airline baggage, and more.
In addition to the EPC specifications the UCODE G2iM offers an integrated Product
Status Flag (PSF) feature and read protection of the memory content.
The UCODE G2iM+ offers on top of the UCODE G2iM features an integrated tag tamper
alarm, digital switch, external supply mode, data transfer mode and real read range
reduction. A special feature is the conditional, automatic real read range reduction, where
the activation condition can be defined by the user, is newly introduced in the UCODE
G2iM+. When connected to a power supply, the READ as well as the WRITE range can
be boosted to a sensitivity of -27 dBm.
The UCODE G2iM+ also allows the segmentation of the 640 bit User Memory in up to
three segments (open, protected, private) with different access levels (Access- and User
Password). For applications which require a longer EPC number the UCODE G2iM+
offers the possibility of up to 448 bit.


NXP Semiconductors Electronic Components Datasheet

SL3S1013 Datasheet

UCODE G2iM

No Preview Available !

NXP Semiconductors
2 Features and benefits
SL3S1003_1013
UCODE G2iM and G2iM+
2.1 Key features
UHF RFID Gen2 tag chip according to EPCglobal v1.2.0
256-bit EPC for UCODE G2iM and up to 448-bit EPC for UCODE G2iM+
Up to 640-bit User Memory which can be segmented in the UCODE G2iM+.
Private User Memory area protected by special User Password
Memory read protection
Integrated Product Status Flag (PSF)
Tag tamper alarm
Digital switch
Data transfer mode
Real Read Range Reduction (Privacy Mode)
Conditional Real Read Range Reduction
External supply mode
Long read/write ranges due to extremely low-power design
Reliable operation of multiple tags due to advanced anti-collision
Broad international operating frequency: from 840 MHz to 960 MHz
Data retention: 20 years
Wide specified temperature range: -40 °C up to +85 °C
2.1.1 Memory
256 bit of EPC memory / up to 448 bit in G2iM+
96-bit Tag IDentifier (TID) including 48-bit factory locked unique serial number
112-bit User TID memory
32-bit Kill Password to permanently disable the tag
32-bit Access Password to allow a transition into the secured state
32-bit User Password to allow access to the private user memory segment
Read protection
BlockWrite (32 bit)
Write Lock
BlockPermalock
2.2 Key benefits
2.2.1 End user benefit
Outstanding User Memory size of 640 bit
Prevention of unauthorized memory access through different levels of read protection
Indication of tag tampering attempt by use of the tag tamper alarm feature
Electronic device configuration and / or activation by the use of the digital switch / data
transfer mode
Theft deterrence supported by the PSF feature (PSF alarm or EPC code)
Small label sizes, long read ranges due to high chip sensitivity
Product identification through unalterable TID range, including a 48 bit serial number
SL3S1003_1013
Product data sheet
COMPANY PUBLIC
All information provided in this document is subject to legal disclaimers.
Rev. 3.8 — 5 February 2019
201238
© NXP B.V. 2019. All rights reserved.
2 / 48


Part Number SL3S1013
Description UCODE G2iM
Maker NXP
Total Page 3 Pages
PDF Download

SL3S1013 Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 SL3S1013 UCODE G2iM
NXP
2 SL3S1014 UCODE
NXP





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy