900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




NXP Semiconductors Electronic Components Datasheet

SLRC610 Datasheet

High-performance ICODE frontend

No Preview Available !

SLRC610
High-performance ICODE frontend SLRC610 and SLRC610
plus
Rev. 4.8 — 1 July 2020
Product data sheet
227648
COMPANY PUBLIC
1 General description
SLRC610, the low-cost RFID frontend.
The SLRC610 multi-protocol NFC frontend IC supports the following operating modes:
Read/write mode supporting ISO/IEC 15693
Read/write mode supporting ICODE EPC UID/ EPC OTP
Read/write mode supporting ISO/IEC 18000-3 mode 3/ EPC Class-1 HF
The SLRC610 supports the vicinity protocol according to ISO/IEC15693, EPC UID and
ISO/IEC 18000-3 mode 3/ EPC Class-1 HF.
The following host interfaces are supported:
Serial Peripheral Interface (SPI)
Serial UART (similar to RS232 with voltage levels dependent on pin voltage supply)
I2C-bus interface (two versions are implemented: I2C and I2CL)
The SLRC610 supports the connection of a secure access module (SAM). A dedicated
separate I2C interface is implemented for a connection of the SAM. The SAM can be
used for high secure key storage and acts as a very performant crypto coprocessor. A
dedicated SAM is available for connection to the SLRC610.


NXP Semiconductors Electronic Components Datasheet

SLRC610 Datasheet

High-performance ICODE frontend

No Preview Available !

NXP Semiconductors
SLRC610
High-performance ICODE frontend SLRC610 and SLRC610 plus
2 Features and benefits
RFID frontend
Supports ISO/IEC15693, ICODE EPC UID and ISO/IEC 18000-3 mode 3/ EPC Class-1
HF
Low-power card detection
Antenna connection with minimum number of external components
Supported host interfaces:
SPI up to 10 Mbit/s
I2C-bus interfaces up to 400 kBd in Fast mode, up to 1000 kBd in Fast mode plus
RS232 Serial UART up to 1228.8 kBd, with voltage levels dependent on pin voltage
supply
Separate I2C-bus interface for connection of a secure access module (SAM)
FIFO buffer with size of 512 byte for highest transaction performance
Flexible and efficient power saving modes including hard power down, standby and
low-power card detection
Cost saving by integrated PLL to derive system clock from 27.12 MHz RF quartz crystal
3 V to 5.5 V power supply (SLRC61002)
2.5 V to 5.5 V power supply (SLRC61003)
Up to 8 free programmable input/output pins
The version SLRC61003 offers a more flexible configuration for Low-Power Card
detection compared to the SLRC6102 with the new register LPCD_OPTIONS. In
addition, the SLRC61003 offers new additional settings for the Load Protocol which fit
very well to smaller antennas. The SLRC61003 is therefore the recommended version
for new designs
SLRC610
Product data sheet
COMPANY PUBLIC
All information provided in this document is subject to legal disclaimers.
Rev. 4.8 — 1 July 2020
227648
© NXP B.V. 2020. All rights reserved.
2 / 145


Part Number SLRC610
Description High-performance ICODE frontend
Maker NXP
Total Page 3 Pages
PDF Download

SLRC610 Datasheet PDF

View PDF for Mobile






Similar Datasheet

1 SLRC610 High-performance ICODE frontend
NXP





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy