Datasheet4U Logo Datasheet4U.com

TDA1015T - 0/5 W audio power amplifier

Datasheet Summary

Description

The TDA1015T is a low-cost audio amplifier which can deliver up to 0,5 W output power into a 16 Ω load impedance at a supply voltage of 9 V.

The amplifier is specially designed for portable applications such as radios and recorders.

Features

  • High input impedance.
  • Separated preamplifier and power amplifier.
  • Limited noise behaviour at radio frequencies.
  • Short-circuit protected.
  • Miniature encapsulation. QUICK.

📥 Download Datasheet

Datasheet preview – TDA1015T

Datasheet Details

Part number TDA1015T
Manufacturer NXP
File Size 75.01 KB
Description 0/5 W audio power amplifier
Datasheet download datasheet TDA1015T Datasheet
Additional preview pages of the TDA1015T datasheet.

📁 Similar Datasheet

  • TDA1010A - Audio Power Output (ETC)
  • TDA1013 - 4W audio power amplifier (ETC)
  • TDA1013A - Audio Power Output (ETC)
  • TDA10023HT - Single chip DVB-C/MCNS channel receiver (Philips)
  • TDA1002A - Recording and Playback Amplifier (ETC)
  • TDA1003A - Motor Regulator and Bias/Erase Oscillator Circuit (Philips)
  • TDA10046HT - Single-Chip DVB-T Channel Decoder (Philips)
  • TDA1006A - MOTOR REGULATOR WITH AUTOMATIC TAPE END INDICATOR (ETC)
  • TDA1022 - BUCKET BRIGADE DELAY LINE (ETC)
  • TDA1023 - Proportional-control triac (Philips)
Other Datasheets by NXP
  • TDA1015 - 1 to 4 W audio power amplifier
  • TDA1010A - 6 W audio power amplifier in car applications 10 W audio power amplifier in mains-fed applications
  • TDA1011 - 2 to 6 W audio power amplifier
  • TDA1011A - 2 to 6w Audio Power Amplifier With Preamplifier
  • TDA1013B - 4 W audio power amplifier with DC volume control
  • TDA1016 - Recording/playback and 2 W audio power amplifier
  • TDA1001B - Interference and noise suppression circuit for FM receivers
  • TDA1001BT - Interference and noise suppression circuit for FM receivers

Full PDF Text Transcription

Click to expand full text
INTEGRATED CIRCUITS DATA SHEET TDA1015T 0,5 W audio power amplifier Product specification File under Integrated Circuits, ICO1 March 1986 Philips Semiconductors Product specification 0,5 W audio power amplifier GENERAL DESCRIPTION TDA1015T The TDA1015T is a low-cost audio amplifier which can deliver up to 0,5 W output power into a 16 Ω load impedance at a supply voltage of 9 V. The amplifier is specially designed for portable applications such as radios and recorders. The IC has a very low supply voltage requirement (3,6 V min.). Features • High input impedance • Separated preamplifier and power amplifier • Limited noise behaviour at radio frequencies • Short-circuit protected • Miniature encapsulation.
Published: |