Datasheet4U Logo Datasheet4U.com

TDA3565 - PAL decoder

Description

The TDA3565 PAL decoder contains all the functions required for PAL signal decoding and colour matrixing and is contained within an 18-pin package.

The oscillator, a.c.c.

Features

  • ailable must be compared with the nominal signal at that output. 6. The signal-to-noise ratio is specified as peak-to-peak signal with respect to r. m. s. noise. 7. These signal amplitudes are determined by the a. c. c. circuit of the reference part. 8. When this level is exceeded the amplitude of the output signal is reduced via a discharge of the capacitor at pin 6 (contrast control). The discharge current is 5,5 mA. April 1986 8 Philips Semiconductors Product specification PAL decoder TDA356.

📥 Download Datasheet

Datasheet preview – TDA3565

Datasheet Details

Part number TDA3565
Manufacturer NXP
File Size 116.61 KB
Description PAL decoder
Datasheet download datasheet TDA3565 Datasheet
Additional preview pages of the TDA3565 datasheet.

📁 Similar Datasheet

  • TDA3562A - PAL/NTSC ONE-CHIP DECODER (ST Microelectronics)
  • TDA3501 - Video Control Combination (Philips)
  • TDA3501 - Chroma Processor + RGB Drive Combination (National)
  • TDA3510 - TDA3510 Circuit (ETC)
  • TDA3540 - Video IF/AFT (Signetics)
  • TDA3541 - Video IF/AFT (Signetics)
  • TDA3570 - NTSC Decoder (Philips)
  • TDA3576 - TDA3576 (ETC)
  • TDA3590A - SECAM PROCESSOR CIRCUIT (ETC)
  • TDA3591 - TDA3591 (ETC)
Other Datasheets by NXP

Full PDF Text Transcription

Click to expand full text
INTEGRATED CIRCUITS DATA SHEET TDA3565 PAL decoder Product specification File under Integrated Circuits, IC02 April 1986 Philips Semiconductors Product specification PAL decoder GENERAL DESCRIPTION TDA3565 The TDA3565 PAL decoder contains all the functions required for PAL signal decoding and colour matrixing and is contained within an 18-pin package. The oscillator, a.c.c. detector and burst phase detector each have single-pin outputs and the coupling capacitor for the luminance input at pin 8 doubles as a storage capacitor for the black level clamping circuit. Black level clamping of the three colour channels is performed using feedback proportional to the red channel black level.
Published: |