Datasheet4U Logo Datasheet4U.com

TDA8005A - Low-power 3 V/5 V smart card coupler

Description

TDA8005A Control and communication through a standard RS232 full-duplex interface Optional additional I/O ports for: keyboard LEDs display

etc.

P80CL51 microcontroller core with 4-kbyte ROM and 256-byte RAM.

Features

  • Smart card supply (5 and 3 V ±5%, 20 mA maximum with controlled rise and fall times).
  • Smart card clock generation (up to 8 MHz), with two times synchronous frequency doubling.
  • Clock STOP HIGH, clock STOP LOW or 1.25 MHz (from internal oscillator) for cards power-down mode.
  • Specific UART on I/O for automatic direct/inverse convention settings and error management at character level.
  • Automatic activation and deactivation sequences through an independen.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TDA8025 IC card interface NXP Semiconductors
TDA8035HN Smart card interface NXP Semiconductors
TDA8060ATS Satellite ZERO-IF QPSK down-converter Philips
TDA8102B H/V Processor for TTL VDU ST Microelectronics
TDA8114 VCR Processor Interface Circuit ST Microelectronics

Other Datasheets by NXP Semiconductors

Part Number Description
TDA8005 Low-power smart card coupler
TDA8000 Smart card interface
TDA8000T Smart card interface
TDA8001 Smart card interface
TDA8002 IC card interface

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
INTEGRATED CIRCUITS DATA SHEET TDA8005A Low-power (3 V/5 V) smart card coupler Preliminary specification File under Integrated Circuits, IC17 1998 Mar 20 Philips Semiconductors Preliminary specification Low-power (3 V/5 V) smart card coupler FEATURES • Smart card supply (5 and 3 V ±5%, 20 mA maximum with controlled rise and fall times) • Smart card clock generation (up to 8 MHz), with two times synchronous frequency doubling • Clock STOP HIGH, clock STOP LOW or 1.25 MHz (from internal oscillator) for cards power-down mode • Specific UART on I/O for automatic direct/inverse convention settings and error management at character level • Automatic activation and deactivation sequences through an independent sequencer • Supports the protocol T = 0 in accordance with ISO 7816 GSM11.
Published: |