Datasheet4U Logo Datasheet4U.com

TDA8007BHL - Multiprotocol IC card interface

General Description

The TDA8007BHL is a cost-effective card interface for dual smart card readers.

Controlled through a parallel bus, it meets all requirements of ISO 7816, GSM 11-11, EMV4.2 and EMV 2000.

It is addressed on a non-multiplexed 8-bit databus, by means of address registers AD0, AD1, AD2 and AD3.

Key Features

  • it greatly simplifies the realization of a reader of any number of cards. It gives the cards and the reader a very high level of security, due to its special hardware against ESD, short-circuiting, power failure, etc. The integrated step-up converter allows operation within a supply voltage range of 2.7 V to 6 V. TDA8007BHL/C4 supports onl.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TDA8025 IC card interface NXP Semiconductors
TDA8035HN Smart card interface NXP Semiconductors
TDA8060ATS Satellite ZERO-IF QPSK down-converter Philips
TDA8102B H/V Processor for TTL VDU ST Microelectronics
TDA8114 VCR Processor Interface Circuit ST Microelectronics

Other Datasheets by NXP Semiconductors

Part Number Description
TDA8007B Double multiprotocol IC card interface
TDA8000 Smart card interface
TDA8000T Smart card interface
TDA8001 Smart card interface
TDA8002 IC card interface

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TDA8007BHL Multiprotocol IC card interface Rev. 9.1 — 18 June 2012 Product data sheet 1. General description The TDA8007BHL is a cost-effective card interface for dual smart card readers. Controlled through a parallel bus, it meets all requirements of ISO 7816, GSM 11-11, EMV4.2 and EMV 2000. It is addressed on a non-multiplexed 8-bit databus, by means of address registers AD0, AD1, AD2 and AD3. TDA8007BHL/C3 can be also addressed through a multiplexed access. The integrated ISO UART and the time-out counters allow easy use even at high baud rates with no real time constraints. Due to its chip select, external input/output and interrupt features, it greatly simplifies the realization of a reader of any number of cards.