Datasheet4U Logo Datasheet4U.com

TDA8542TS - 2 x 0.7 W BTL audio amplifier

Description

The TDA8542TS is a two channel audio power amplifier for an output power of 2 × 0.7 W with a 16 Ω load at a 5 V supply.

At a low supply voltage of 3.3 V an output power of 0.6 W with an 8 Ω load can be obtained.

Features

  • Flexibility in use.
  • Few external components.
  • Low saturation voltage of output stage.
  • Gain can be fixed with external resistors.
  • Standby mode controlled by CMOS compatible levels.
  • Low standby current.
  • No switch-on/switch-off plops.
  • High supply voltage ripple rejection.
  • Protected against electrostatic discharge.
  • Outputs short-circuit safe to ground, VCC and across the load.
  • Thermally protected. QUIC.

📥 Download Datasheet

Datasheet preview – TDA8542TS

Datasheet Details

Part number TDA8542TS
Manufacturer NXP
File Size 205.96 KB
Description 2 x 0.7 W BTL audio amplifier
Datasheet download datasheet TDA8542TS Datasheet
Additional preview pages of the TDA8542TS datasheet.

📁 Similar Datasheet

  • TDA8547 - 2 x 0.7W BTL AUDIO AMPLIFIER (UTC)
  • TDA8559T - Low-voltage stereo headphone amplifier (Philips)
  • TDA8566 - stereo BTL car radio power amplifier (NXP Semiconductors)
  • TDA8577 - Dual common-mode rejection differential line receiver (Philips)
  • TDA8588AJ - Power Amplifier and Multiple Voltage Regulator (Philips)
  • TDA8588BJ - Power Amplifier and Multiple Voltage Regulator (Philips)
  • TDA8588J - Power Amplifier and Multiple Voltage Regulator (Philips)
  • TDA8589BJ - I2C Bus Controlled 4 x 45 Watt Power Amplifier and Multiple Voltage Regulator (Philips)
  • TDA8595 - I2C-bus controlled 4 x 45 W power amplifer (NXP Semiconductors)
  • TDA8025 - IC card interface (NXP Semiconductors)
Other Datasheets by NXP
  • TDA8542 - 2 x 1 W BTL audio amplifier
  • TDA8542AT - 2 x 1.5 W BTL audio amplifier
  • TDA8540 - 4 X 4 video switch matrix
  • TDA8541 - 1 W BTL audio amplifier
  • TDA8543 - 2 W BTL audio amplifier
  • TDA8547 - 2 x 1 W BTL audio amplifier with output channel switching
  • TDA8547TS - 2 x 0.7 W BTL audio amplifier with output channel switching
  • TDA8501 - PAL/NTSC encoder

Full PDF Text Transcription

Click to expand full text
INTEGRATED CIRCUITS DATA SHEET TDA8542TS 2 × 0.7 W BTL audio amplifier Product specification Supersedes data of 1997 Nov 17 File under Integrated Circuits, IC01 1998 Mar 25 Philips Semiconductors Product specification 2 × 0.7 W BTL audio amplifier FEATURES • Flexibility in use • Few external components • Low saturation voltage of output stage • Gain can be fixed with external resistors • Standby mode controlled by CMOS compatible levels • Low standby current • No switch-on/switch-off plops • High supply voltage ripple rejection • Protected against electrostatic discharge • Outputs short-circuit safe to ground, VCC and across the load • Thermally protected.
Published: |