Datasheet4U Logo Datasheet4U.com

TDA8947J - 4-channel audio amplifier

Description

The TDA8947J contains four identical audio power amplifiers.

Features

  • s SE: 1 W to 25 W, BTL: 4 W to 50 W operation possibility (2.1 system) s Soft clipping s Standby and Mute mode s No on/off switching plops s Low standby current s High supply voltage ripple rejection s Outputs short-circuit protected to ground, supply and across the load s Thermally protected s Pin compatible with TDA8944AJ and TDA8946AJ 3.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TDA8944AJ 2 x 7 W BTL audio amplifier Philips
TDA8946AJ 2 x 15 W BTL audio amplifier Philips
TDA8948 7W audio amplifier ETC
TDA8948J 4-channel audio amplifier NXP Semiconductors
TDA8920TH Class-D audio amplifier 2 x 80W Single chip Philips

Other Datasheets by NXP Semiconductors

Part Number Description
TDA8941P 1.5 W mono Bridge Tied Load BTL audio amplifier
TDA8942P 2 x 1.5 W stereo Bridge Tied Load BTL audio amplifier
TDA8943SF 6 W mono Bridge Tied Load BTL audio amplifier
TDA8944J 2 x 7 W stereo Bridge Tied Load BTL audio amplifier
TDA8945S 15 W mono Bridge Tied Load BTL audio amplifier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TDA8947J 4-channel audio amplifier Rev. 02 — 16 June 2005 Product data sheet 1. General description The TDA8947J contains four identical audio power amplifiers. The TDA8947J can be used as: four Single-Ended (SE) channels with a fixed gain of 26 dB, two times Bridge-Tied Load (BTL) channels with a fixed gain of 32 dB or two times SE channels (26 dB gain) plus one BTL channel (32 dB gain) operating as a 2.1 system The TDA8947J comes in a 17-pin Dil-Bent-Sil (DBS) power package. The TDA8947J is pin compatible with the TDA8944AJ and TDA8946AJ. The TDA8947J contains a unique protection circuit that is solely based on multiple temperature measurements inside the chip. This gives maximum output power for all supply voltages and load conditions with no unnecessary audio holes.
Published: |