TEA2096T Datasheet | NXP Semiconductors

description The TEA2096T is a new synchronous rectifier (SR) controller IC for switched-mode power supplies. It incorporates an adaptive gate drive method for maximum efficiency at any load. The TEA2096T is a dedicated controller IC for synchronous rectification on the secondary side of resonant converters. It has two driver stages for driving the SR MOSFETs, which rectify the outputs of the central tap secondary transformer windings. The two gate driver stages have their own sensing inputs and operate independently. The TEA2096T is optimized for efficient operation with very low-ohmic MOSFETs and switching at high frequencies. The TEA2096T is fabricated in a silicon-on-insulator (SOI) process. 2 Features and benefits 2.1 Efficiency features - Adaptive gate drive for maximum efficiency at any load - Supply current in energy save operation of 80 μA - Regulation level of - 29 m V for driving low-ohmic MOSFETs 2.2 Application features - Drain sense voltage to 200 V - Wide supply voltage range from 4.5 V to 38 V - Dual synchronous rectification for LLC resonant - Supports 5 V operation with logic level SR MOSFETs - Differential inputs for sensing the drain and source voltages of each SR MOSFET - SO8 package 2.3 Control features - SR control without minimum on-time - Adaptive gate drive for fast turn-off at the end of conduction - Undervoltage lockout (UVLO) protection with active gate pull-down - Interlock function to prevent simultaneous conduction of the external MOSFETs - Supports 1 MHz switching frequency NXP Semiconductors Green Chip dual synchronous rectifier controller 3 Applications The TEA2096T is intended for resonant power supplies. In such applications, it can drive two external synchronous rectifier MOSFETs for the rectification of the voltages on the two secondary windings of the transformer. These MOSFETs replace diodes. It can be used in all power supplies requiring high efficiency: - Adapters - Power supplies for desktop PC and all-in-one PC -...