Datasheet4U Logo Datasheet4U.com

TJR1443 - High-speed CAN transceiver

General Description

The TJR1443 is a member of the TJR144x family of transceivers that provide an interface between a Controller Area Network (CAN) or CAN FD (Flexible Data rate) protocol controller and the physical two-wire CAN bus.

Key Features

  • 2.1 General.
  • ISO 11898-2:2016, SAE J2284-1 to SAE J2284-5 and SAE J1939-14 compliant.
  • Standard CAN and CAN FD data bit rates up to 5 Mbit/s.
  • Low Electromagnetic Emission (EME) and high Electromagnetic Immunity (EMI).
  • Qualified according to AEC-Q100 Grade 0.
  • VIO input for interfacing with 3.3 V to 5 V microcontrollers.
  • Listen-only mode for node diagnosis and failure containment.
  • Available in SO14 and leadless HVSON14 (3.0 mm x 4.5 mm).

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TJR1443 High-speed CAN transceiver with Sleep mode Rev. 2 — 15 October 2021 Product data sheet 1 General description The TJR1443 is a member of the TJR144x family of transceivers that provide an interface between a Controller Area Network (CAN) or CAN FD (Flexible Data rate) protocol controller and the physical two-wire CAN bus. TJR144x transceivers implement the CAN physical layer as defined in ISO 11898-2:2016 and SAE J2284-1 to SAE J2284-5, and are fully interoperable with high-speed Classical CAN and CAN FD transceivers. All TJR144x variants enable reliable communication in the CAN FD fast phase at data rates up to 5 Mbit/s and are qualified to AEC-Q100 Grade 0, supporting operation at 150 °C ambient temperature.