Datasheet4U Logo Datasheet4U.com

TJR1443A - High-speed CAN transceiver

Download the TJR1443A datasheet PDF. This datasheet also covers the TJR1443 variant, as both devices belong to the same high-speed can transceiver family and are provided as variant models within a single manufacturer datasheet.

General Description

The TJR1443 is a member of the TJR144x family of transceivers that provide an interface between a Controller Area Network (CAN) or CAN FD (Flexible Data rate) protocol controller and the physical two-wire CAN bus.

Key Features

  • 2.1 General.
  • ISO 11898-2:2016, SAE J2284-1 to SAE J2284-5 and SAE J1939-14 compliant.
  • Standard CAN and CAN FD data bit rates up to 5 Mbit/s.
  • Low Electromagnetic Emission (EME) and high Electromagnetic Immunity (EMI).
  • Qualified according to AEC-Q100 Grade 0.
  • VIO input for interfacing with 3.3 V to 5 V microcontrollers.
  • Listen-only mode for node diagnosis and failure containment.
  • Available in SO14 and leadless HVSON14 (3.0 mm x 4.5 mm).

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (TJR1443-NXP.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer

Other Datasheets by NXP Semiconductors

Part Number Description
TJR1443AT High-speed CAN transceiver
TJR1443 High-speed CAN transceiver
TJR1442 High-speed CAN transceiver
TJR1442AT High-speed CAN transceiver
TJR1442BT High-speed CAN transceiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TJR1443 High-speed CAN transceiver with Sleep mode Rev. 2 — 15 October 2021 Product data sheet 1 General description The TJR1443 is a member of the TJR144x family of transceivers that provide an interface between a Controller Area Network (CAN) or CAN FD (Flexible Data rate) protocol controller and the physical two-wire CAN bus. TJR144x transceivers implement the CAN physical layer as defined in ISO 11898-2:2016 and SAE J2284-1 to SAE J2284-5, and are fully interoperable with high-speed Classical CAN and CAN FD transceivers. All TJR144x variants enable reliable communication in the CAN FD fast phase at data rates up to 5 Mbit/s and are qualified to AEC-Q100 Grade 0, supporting operation at 150 °C ambient temperature.