WLAN7001C Datasheet | NXP Semiconductors

description The WLAN7001C is a fully integrated RF front-end MMIC for 802.11a/n/ac WLAN standard with up to 80 MHz channel bandwidth. It includes a Low-Noise Amplifier, a Single Pole Double Throw Switch required for TDD operation. The WLAN7001C also includes a TX Power Amplifier and an integrated power detector covering the entire ISM band. The WLAN7001C integrates harmonic and coexistence filtering. The WLAN7001C has RX by-pass mode for high-power signal handling and low-power TX mode to optimize power efficiency of the PA for low-power levels. Manufactured on QUBi C eighth generation Si Ge:C technology of NXP Semiconductors. The WLAN7001C offers best-inclass noise figure, linearity, and power efficiency and low insertion loss CMOS switches with good process stability. The WLAN7001C has a 1.7 mm × 2.0 mm footprint with HX2SON10 package with 300 μm thickness. 2 Features and benefits - Full ISM High Band 5150 MHz to 5850 MHz - Fully integrated RF front end - Low-noise amplifier (LNA) with bypass mode - Single Pole Double Throw switch (SPDT) - Power amplifier (PA) with high linearity and a low-power mode - Integrated power detector for closed loop control - Integrated matching for 50 Ω for input & output; DC free input/output ports - Integrated harmonic and coexistence filtering - 4 modes of operation (RX Bypass/Stand-by, RX LNA, TX high linearity, TX low power) - Supply voltage 3.0 V to 4.75 V - Low supply current of 8 m A in RX mode with optimized performances - Low RX noise figure = 2.35 d B - High efficiency: supply current of 185 m A in TX mode at +17 d Bm, MCS9 - TX output power of +15 d Bm at 1.25 % DEVM (MCS9/VHT80) - TX output power of +17.5 d Bm at 2.0 % DEVM (MCS7/HT40) - ESD protection on all pins (HBM > 2 k V) - Small 10-pins leadless package 1.7 mm × 2.0 mm × 0.3 mm; 0.35 mm pitch NXP Semiconductors WLAN 5 GHz Front-end IC 3 Applications - IEEE 802.11a/n/ac Wi Fi, WLAN - Smartphones, tablets, netbooks, and other portable puting devices - Access...