Datasheet4U Logo Datasheet4U.com

NX3DV2567 - Low-ohmic four-pole double-throw analog switch

General Description

The NX3DV2567 is a four-pole double-throw analog switch (4PDT) optimized for switching WLAN-SIM supply, data and control signals.

It has one digital select input (S) and four switches each with two independent input/outputs (nY0 and nY1) and a common input/output (nZ).

Key Features

  • Wide supply voltage range from 1.4 V to 4.3 V.
  • Very low ON resistance for supply path: ‹ 0.5 Ω (typical) at VCC = 1.8 V ‹ 0.45 Ω (typical) at VCC = 2.7 V.
  • Low ON resistance for data path: ‹ 7 Ω (typical) at VCC = 1.8 V ‹ 6 Ω (typical) at VCC = 2.7 V.
  • Low ON capacitance for data path.
  • Wide.
  • 3 db bandwidth > 160 MHz.
  • Break-before-make switching.
  • High noise immunity.
  • ESD protection: ‹ HBM JESD22-A114F Class 3A exceeds.

📥 Download Datasheet

Datasheet Details

Part number NX3DV2567
Manufacturer NXP Semiconductors
File Size 666.49 KB
Description Low-ohmic four-pole double-throw analog switch
Datasheet download datasheet NX3DV2567 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NX3DV42 Dual high-speed USB 2.0 double-pole double-throw analog switch NXP
NX3DV642 3-lane high-speed MIPI compatible switch NXP
NX3008CBKS N/P-channel MOSFET nexperia
NX3008CBKV N/P-channel MOSFET nexperia
NX3008NBK N-channel MOSFET nexperia

Other Datasheets by NXP Semiconductors

Part Number Description
NX3DV221 High-speed USB2.0 switch
NX3DV3899 Dual double-pole double-throw analog switch
NX3008CBKS MOSFET
NX3008CBKV MOSFET
NX3008NBKMB MOSFET

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet.co.kr NX3DV2567 Low-ohmic four-pole double-throw analog switch Rev. 1 — 28 September 2010 Product data sheet 1. General description The NX3DV2567 is a four-pole double-throw analog switch (4PDT) optimized for switching WLAN-SIM supply, data and control signals. It has one digital select input (S) and four switches each with two independent input/outputs (nY0 and nY1) and a common input/output (nZ). Schmitt trigger action at S makes the circuit tolerant to slower input rise and fall times across the entire VCC range from 1.4 V to 4.3 V. A low input voltage threshold allows pin S to be driven by lower level logic signals without significant increase in supply current ICC. This makes it possible for the NX3DV2567 to switch 4.3 V signals with a 1.