Datasheet4U Logo Datasheet4U.com

NX3V1G66 - Low-voltage analog switch

General Description

The NX3V1G66 is a low-ohmic single-pole single-throw analog switch.

It has two input/output terminals (Y and Z) and an active HIGH enable input pin (E).

When pin E is LOW, the analog switch is turned off.

Key Features

  • Wide supply voltage range from 1.4 V to 4.3 V.
  • Very low ON resistance (peak):.
  • 0.8  (typical) at VCC = 1.4 V.
  • 0.5  (typical) at VCC = 1.65 V.
  • 0.3  (typical) at VCC = 2.3 V.
  • 0.25  (typical) at VCC = 2.7 V.
  • 0.25  (typical) at VCC = 4.3 V.
  • High noise immunity.
  • ESD protection:.
  • HBM JESD22-A114F Class 3A exceeds 7500 V.
  • MM JESD22-A115-A exceeds 200 V.
  • CDM AEC-Q100-011 revision B exceeds 1000 V.
  • IEC61000-4-2 contact discharge excee.

📥 Download Datasheet

Other Datasheets by NXP Semiconductors

Part Number Description
NX3V1G384 Low-ohmic single-pole single-throw analog switch
NX3V1T66 Low-voltage analog switch
NX3008CBKS MOSFET
NX3008CBKV MOSFET
NX3008NBKMB MOSFET
NX3008NBKS 350mA dual N-channel Trench MOSFET
NX3008NBKT MOSFET
NX3008NBKV MOSFET
NX3008NBKW MOSFET
NX3008PBK 30V 230mA P-channel Trench MOSFET

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NX3V1G66 Low-ohmic single-pole single-throw analog switch Rev. 7 — 4 November 2011 Product data sheet 1. General description The NX3V1G66 is a low-ohmic single-pole single-throw analog switch. It has two input/output terminals (Y and Z) and an active HIGH enable input pin (E). When pin E is LOW, the analog switch is turned off. Schmitt trigger action at the enable input (E) makes the circuit tolerant to slower input rise and fall times. The NX3V1G66 allows signals with amplitude up to VCC to be transmitted from Y to Z or from Z to Y. Its ultra-low ON resistance (0.3 ) and flatness (0.1 ) ensures minimal attenuation and distortion of transmitted signals. 2. Features and benefits  Wide supply voltage range from 1.4 V to 4.3 V  Very low ON resistance (peak):  0.