The PCA9625 is an I2C-bus controlled 16-bit LED driver optimized for voltage switch dimming and blinking 100 mA Red/Green/Blue/Amber (RGBA) LEDs.
Key Features
I 16 LED drivers. Each output programmable at: N Off N On N Programmable LED brightness N Programmable group dimming/blinking mixed with individual LED brightness
I 1 MHz Fast-mode Plus compatible I2C-bus interface with 30 mA high drive capability on SDA output for driving high capacitive buses
I 256-step (8-bit) linear programmable brightness per LED output varying from fully off (default) to maximum brightness using a 97 kHz PWM signal
I 256-step group brightness control allows general dimming.
Full PDF Text Transcription for PCA9625 (Reference)
Note: Below is a high-fidelity text extraction (approx. 800 characters) for
PCA9625. For precise diagrams, and layout, please refer to the original PDF.
PCA9625 16-bit Fm+ I2C-bus 100 mA 24 V LED driver Rev. 02 — 15 January 2008 Product data sheet 1. General description The PCA9625 is an I2C-bus controlled 16-bit LED driv...
View more extracted text
neral description The PCA9625 is an I2C-bus controlled 16-bit LED driver optimized for voltage switch dimming and blinking 100 mA Red/Green/Blue/Amber (RGBA) LEDs. Each LED output has its own 8-bit resolution (256 steps) fixed frequency individual PWM controller that operates at 97 kHz with a duty cycle that is adjustable from 0 % to 99.6 % to allow the LED to be set to a specific brightness value. An additional 8-bit resolution (256 steps) group PWM controller has both a fixed frequency of 190 Hz and an adjustable frequency between 24 Hz to once every 10.73 seconds with a duty cycle that is adjustable from 0 % to 99.6 % that