Datasheet4U Logo Datasheet4U.com

SC16C850V - XScale VLIO bus interface

General Description

The SC16C850V is a 1.8 V, low power single channel Universal Asynchronous Receiver and Transmitter (UART) used for serial data communications.

Its principal function is to convert parallel data into serial data and vice versa.

The UART can handle serial data rates up to 5 Mbit/s.

Key Features

  • are available (see Section 6.2). The SC16C850V family UART provides enhanced UART functions with 128-byte FIFOs, modem control interface and IrDA encoder/decoder. On-board status registers provide the user with error indications and operational status. System interrupts and modem control features may be tailored by software to meet specific user requirements. An internal loopback capability allows on-board diagnostics. Independent programmable baud rate generators are provided to select transmit a.

📥 Download Datasheet

Full PDF Text Transcription for SC16C850V (Reference)

Note: Below is a high-fidelity text extraction (approx. 800 characters) for SC16C850V. For precise diagrams, and layout, please refer to the original PDF.

SC16C850V 1.8 V single UART, 5 Mbit/s (max.) with 128-byte FIFOs, infrared (IrDA), and XScale VLIO bus interface Rev. 04 — 14 January 2008 Product data sheet 1. General d...

View more extracted text
us interface Rev. 04 — 14 January 2008 Product data sheet 1. General description The SC16C850V is a 1.8 V, low power single channel Universal Asynchronous Receiver and Transmitter (UART) used for serial data communications. Its principal function is to convert parallel data into serial data and vice versa. The UART can handle serial data rates up to 5 Mbit/s. SC16C850V can be programmed to operate in extended mode where additional advanced UART features are available (see Section 6.2).The SC16C850V family UART provides enhanced UART functions with 128-byte FIFOs, modem control interface and IrDA encoder/decoder.