900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




National Semiconductor Electronic Components Datasheet

ADC108S052 Datasheet

10-Bit A/D Converter

No Preview Available !

September 2005
www.DataSheet4U.com
ADC108S052
8-Channel, 200 kSPS to 500 kSPS, 10-Bit A/D Converter
General Description
The ADC108S052 is a low-power, eight-channel CMOS 10-
bit analog-to-digital converter specified for conversion
throughput rates of 200 kSPS to 500 kSPS. The converter is
based on a successive-approximation register architecture
with an internal track-and-hold circuit. It can be configured to
accept up to eight input signals at inputs IN0 through IN7.
The output serial data is straight binary and is compatible
with several standards, such as SPI, QSPI, MICROW-
IRE, and many common DSP serial interfaces.
The ADC108S052 may be operated with independent ana-
log and digital supplies. The analog supply (VA) can range
from +2.7V to +5.25V, and the digital supply (VD) can range
from +2.7V to VA. Normal power consumption using a +3V or
+5V supply is 1.5 mW and 7.5 mW, respectively. The power-
down feature reduces the power consumption to 0.09 µW
using a +3V supply and 0.30 µW using a +5V supply.
The ADC108S052 is packaged in a 16-lead TSSOP pack-
age. Operation over the extended industrial temperature
range of −40˚C to +105˚C is guaranteed.
Features
n Eight input channels
n Variable power management
n Independent analog and digital supplies
n SPI/QSPI/MICROWIRE/DSP compatible
n Packaged in 16-lead TSSOP
Key Specifications
n Conversion Rate
n DNL (VA = VD = 2.7V to 5.0V)
n INL (VA = VD = 2.7V to 5.0V)
n Power Consumption
— 3V Supply
— 5V Supply
200 kSPS to 500 kSPS
±0.4 LSB (max)
±0.4 LSB (max)
1.5 mW (typ)
7.5 mW (typ)
Applications
n Automotive Navigation
n Portable Systems
n Medical Instruments
n Mobile Communications
n Instrumentation and Control Systems
Connection Diagram
Ordering Information
Order Code
ADC108S052CIMT
ADC108S052CIMTX
ADC108S052EVAL
Temperature Range
−40˚C to +105˚C
−40˚C to +105˚C
20164405
Description
16-Lead TSSOP Package
16-Lead TSSOP Package, Tape & Reel
Evaluation Board
TRI-STATE® is a trademark of National Semiconductor Corporation.
MICROWIREis a trademark of National Semiconductor Corporation.
QSPIand SPIare trademarks of Motorola, Inc.
© 2005 National Semiconductor Corporation DS201644
www.national.com


National Semiconductor Electronic Components Datasheet

ADC108S052 Datasheet

10-Bit A/D Converter

No Preview Available !

Block Diagram
www.DataSheet4U.com
20164407
Pin Descriptions and Equivalent Circuits
Pin No.
ANALOG I/O
4 - 11
DIGITAL I/O
Symbol
IN0 to IN7
16 SCLK
15 DOUT
14 DIN
1 CS
POWER SUPPLY
2 VA
13 VD
3 AGND
12 DGND
Equivalent Circuit
Description
Analog inputs. These signals can range from 0V to VREF.
Digital clock input. The guaranteed performance range of
frequencies for this input is 8 MHz to 16 MHz. This clock
directly controls the conversion and readout processes.
Digital data output. The output samples are clocked out of this
pin on the falling edges of the SCLK pin.
Digital data input. The ADC108S052’s Control Register is
loaded through this pin on rising edges of the SCLK pin.
Chip select. On the falling edge of CS, a conversion process
begins. Conversions continue as long as CS is held low.
Positive analog supply pin. This voltage is also used as the
reference voltage. This pin should be connected to a quiet
+2.7V to +5.25V source and bypassed to GND with 1 µF and
0.1 µF monolithic ceramic capacitors located within 1 cm of
the power pin.
Positive digital supply pin. This pin should be connected to a
+2.7V to VA supply, and bypassed to GND with a 0.1 µF
monolithic ceramic capacitor located within 1 cm of the power
pin.
The ground return for the analog supply and signals.
The ground return for the digital supply and signals.
www.national.com
2


Part Number ADC108S052
Description 10-Bit A/D Converter
Maker National Semiconductor
Total Page 17 Pages
PDF Download

ADC108S052 Datasheet PDF

View PDF for Mobile






Similar Datasheet

1 ADC108S052 ADC108S052 8-Channel 200 ksps to 500 ksps 10-Bit A/D Converter (Rev. G)
ETCTI
2 ADC108S052 10-Bit A/D Converter
National Semiconductor





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy