Datasheet4U Logo Datasheet4U.com

DAC084S085 - 8-Bit Micro Power QUAD Digital-to-Analog Converter

Description

The DAC084S085 is a full-featured, general purpose QUAD 8-bit voltage-output digital-to-analog converter (DAC) that can operate from a single +2.7V to 5.5V supply and uses 370 µA at 3V and 500 µA at 5V.

The DAC084S085 is packaged in a 10-lead MSOP package.

Features

  • n n n n n n n Guaranteed Monotonicity Low Power Operation Rail-to-Rail Voltage Output Power-on Reset to 0V Simultaneous Output Updating Wide power supply range (+2.7V to +5.5V) Power Down Modes Key Specifications n n n n n n n Resolution INL DNL Settling Time Zero Code Error Full-Scale Error Supply Current.
  • Normal.
  • Pwr Down 8 bits ± 0.5 LSB (max) +0.18 /.
  • 0.13 LSB 4.5 µs +15 mV.
  • 0.75 %FS (max) (max) (max) (max) 485 µA (3.6V) / 650 µA (5.5V) max 20 nA (3.6V) /.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
DAC084S085 8-Bit Micropower QUAD Digital-to-Analog Converter Texas Instruments
DAC08 8-Bit high-speed multiplying D/A converter NXP
DAC08 Multiplying D/A Converter Analog Devices
DAC0800 8-Bit Digital-to-Analog Converters Texas Instruments
DAC0802 8-Bit Digital-to-Analog Converters Texas Instruments

Other Datasheets by National Semiconductor (Texas Instruments)

Part Number Description
DAC0800 8-Bit Digital-to-Analog Converters
DAC0801 8-BIT DIGITAL-TO-ANALOG CONVERTERS
DAC0802 8-Bit Digital-to-Analog Converters
DAC0806 8-Bit D/A Converters
DAC0807 8-Bit D/A Converters

Full PDF Text Transcription

Click to expand full text
www.DataSheet4U.com DAC084S085 8-Bit Micro Power QUAD Digital-to-Analog Converter with Rail-to-Rail Output June 2006 DAC084S085 8-Bit Micro Power QUAD Digital-to-Analog Converter with Rail-to-Rail Output General Description The DAC084S085 is a full-featured, general purpose QUAD 8-bit voltage-output digital-to-analog converter (DAC) that can operate from a single +2.7V to 5.5V supply and uses 370 µA at 3V and 500 µA at 5V. The DAC084S085 is packaged in a 10-lead MSOP package. The on-chip output amplifier allows rail-to-rail output swing and the three wire serial interface operates at clock rates up to 40 MHz over the entire supply voltage range. Competitive devices are limited to 25 MHz clock rates at supply voltages in the 2.7V to 3.6V range.
Published: |