Datasheet4U Logo Datasheet4U.com

DAC104S085 - 10-Bit Micro Power QUAD Digital-to-Analog Converter

Description

The DAC104S085 is a full-featured, general purpose QUAD 10-bit voltage-output digital-to-analog converter (DAC) that can operate from a single +2.7V to 5.5V supply and uses 350 µA at 3V and 500 µA at 5V.

The DAC104S085 is packaged in a 10-lead MSOP package.

Features

  • n n n n n n n Guaranteed Monotonicity Low Power Operation Rail-to-Rail Voltage Output Power-on Reset to 0V Simultaneous Output Updating Wide power supply range (+2.7V to +5.5V) Power Down Modes Key Specifications n n n n n n n Resolution INL DNL Settling Time Zero Code Error Full-Scale Error Supply Current.
  • Normal.
  • Pwr Down 10 bits ± 2 LSB (max) +0.35 /.
  • 0.25 LSB 6 µs +15 mV.
  • 0.75 %FS (max) (max) (max) (max) 485 µA (3.6V) / 650 µA (5.5V) max 20 nA (3.6V) / 30.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
DAC104S085 10-Bit Micro Power QUAD Digital-to-Analog Converter Texas Instruments
DAC104S085-Q1 10-Bit Micro Power QUAD Digital-to-Analog Converter Texas Instruments
DAC10 10-Bit High Speed Multiplying D/A Converter Universal Digital Logic Interface Analog Devices
DAC100 10-Bit Current Output D/A Converter Analog Devices
DAC1003D160 Dual 10-bit DAC IDT

Other Datasheets by National Semiconductor (Texas Instruments)

Part Number Description
DAC1000 DOUBLE-BUFFERED D-A CONVERTERS
DAC1001 DOUBLE-BUFFERED D-A CONVERTERS
DAC1002 DOUBLE-BUFFERED D-A CONVERTERS
DAC1006 P Compatible/ Double-Buffered D to A Converters
DAC1007 P Compatible/ Double-Buffered D to A Converters

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com DAC104S085 10-Bit Micro Power QUAD Digital-to-Analog Converter with Rail-to-Rail Output June 2006 DAC104S085 10-Bit Micro Power QUAD Digital-to-Analog Converter with Rail-to-Rail Output General Description The DAC104S085 is a full-featured, general purpose QUAD 10-bit voltage-output digital-to-analog converter (DAC) that can operate from a single +2.7V to 5.5V supply and uses 350 µA at 3V and 500 µA at 5V. The DAC104S085 is packaged in a 10-lead MSOP package. The on-chip output amplifier allows rail-to-rail output swing and the three wire serial interface operates at clock rates up to 40 MHz over the entire supply voltage range. Competitive devices are limited to 25 MHz clock rates at supply voltages in the 2.7V to 3.6V range.
Published: |