Datasheet4U Logo Datasheet4U.com

DAC122S085 - 12-Bit Micro Power DUAL Digital-to-Analog Converter

Description

The DAC122S085 is a full-featured, general purpose DUAL 12-bit voltage-output digital-to-analog converter (DAC) that can operate from a single +2.7V to 5.5V supply and uses 210 µA at 3V and 320 µA at 5V.

The DAC122S085 is packaged in a 10-lead MSOP package.

Features

  • n n n n n n n Guaranteed Monotonicity Low Power Operation Rail-to-Rail Voltage Output Power-on Reset to 0V Simultaneous Output Updating Wide power supply range (+2.7V to +5.5V) Power Down Modes Key Specifications n n n n n n n Resolution INL DNL Settling Time Zero Code Error Full-Scale Error Supply Current.
  • Normal.
  • Pwr Down 12 bits ± 8 LSB (max) +0.7 /.
  • 0.5 LSB 8.5 µs +15 mV.
  • 0.75 %FS (max) (max) (max) (max) 270 µA (3.6V) / 410 µA (5.5V) max 20 nA (3.6V) / 30.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
DAC122S085 12-Bit Micro Power DUAL Digital-to-Analog Converter Texas Instruments
DAC1220 20-Bit Low-Power Digital-to-Analog Converter Texas Instruments
DAC1220 20-Bit Low Power DIGITAL-TO-ANALOG CONVERTER Burr-Brown Corporation
DAC1221 16-Bit Low Power DIGITAL-TO-ANALOG CONVERTER Burr-Brown Corporation
DAC1200KP-V Integrated Circuit 12-Bit Resolution Digital to Analog Converter Burr-Brown

Other Datasheets by National Semiconductor (Texas Instruments)

Part Number Description
DAC1220 12-Bit Binary Multiplying D/A Converter
DAC1221 Binary Multiplying D/A Converter
DAC1222 Binary Multiplying D/A Converter
DAC1200 (DAC1200 / DAC1201) 12-Bit Digital to Analog Converters
DAC1201 (DAC1200 / DAC1201) 12-Bit Digital to Analog Converters

Full PDF Text Transcription

Click to expand full text
www.DataSheet4U.com DAC122S085 12-Bit Micro Power DUAL Digital-to-Analog Converter with Rail-to-Rail Output June 2006 DAC122S085 12-Bit Micro Power DUAL Digital-to-Analog Converter with Rail-to-Rail Output General Description The DAC122S085 is a full-featured, general purpose DUAL 12-bit voltage-output digital-to-analog converter (DAC) that can operate from a single +2.7V to 5.5V supply and uses 210 µA at 3V and 320 µA at 5V. The DAC122S085 is packaged in a 10-lead MSOP package. The on-chip output amplifier allows rail-to-rail output swing and the three wire serial interface operates at clock rates up to 40 MHz over the entire supply voltage range. Competitive devices are limited to 25 MHz clock rates at supply voltages in the 2.7V to 3.6V range.
Published: |