Datasheet Details
| Part number | DM54121 |
|---|---|
| Manufacturer | National Semiconductor (now Texas Instruments) |
| File Size | 118.19 KB |
| Description | One-Shot with Clear and Complementary Outputs |
| Download | DM54121 Download (PDF) |
|
|
| Part number | DM54121 |
|---|---|
| Manufacturer | National Semiconductor (now Texas Instruments) |
| File Size | 118.19 KB |
| Description | One-Shot with Clear and Complementary Outputs |
| Download | DM54121 Download (PDF) |
|
|
|
The DM54 74121 is a monostable multivibrator featuring both positive and negative edge triggering with complementary outputs An internal 2kX timing resistor is provided for design convenience minimizing component count and layout problems This device can be used with a single external capacitor Inputs (A) are active-low trigger transition inputs and input (B) is an active-high transition Schmitt-trigger input that allows jitter-free triggering from inputs with transition rates as slow as 1 volt second A high immunity to VCC noise of typically 1 5V is also provided by internal circuitry at the input stage To obtain optimum and trouble free operation please read operating rules and NSC one-shot application notes carefully and observe recommendations
54121 DM54121 DM74121 One-Shot with Clear and Complementary Outputs June 1989 54121 DM54121 DM74121 One-Shot with Clear and Complementary Outputs.
| Part Number | Description |
|---|---|
| DM54122 | Retriggerable Resettable Multivibrator |
| DM54123 | Dual Retriggerable One-Shot with Clear and Complementary Outputs |
| DM54125 | Quad TRI-STATE Buffers |
| DM5410 | Triple 3-Input NAND Gates |
| DM54132 | DM54132/DM74132 Quad 2-Input NAND Gates with Schmitt Trigger Inputs |
| DM5414 | Hex Inverter with Schmitt Trigger Inputs |
| DM54141 | BCD to decimal decoder/driver |
| DM54150 | Data Selectors/Multiplexers |
| DM54151A | Data Selectors/Multiplexers |
| DM54153 | Dual 4-Line to 1-Line Data Selectors/Multiplexers |