Datasheet4U Logo Datasheet4U.com

DS10BR254 - 1.5 Gbps 1:4 LVDS Repeater

Description

The DS10BR254 is a 1.5 Gbps 1:4 LVDS repeater optimized for high-speed signal routing and distribution over FR-4 printed circuit board backplanes and balanced cables.

Fully differential signal paths ensure exceptional signal integrity and noise immunity.

Features

  • DC - 1.5 Gbps low jitter, low skew, low power operation.
  • Wide Input Common Mode Voltage Range allows for DC.
  • coupled interface to LVDS, CML and LVPECL drivers Redundant inputs LOS circuitry detects open inputs fault condition Integrated 100Ω input and output terminations 8 kV ESD on LVDS I/O pins protects adjoining components Small 6 mm x 6 mm LLP-40 space saving package.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
DS10BR254 DS10BR254 1.5 Gbps 1:4 LVDS Repeater (Rev. D) ETCTI
DS10BR150 DS10BR150 1.0 Gbps LVDS Buffer / Repeater (Rev. D) ETCTI
DS1000 5-Tap Silicon Delay Line Dallas Semiconducotr
DS1003 4-Tap Silicon Delay Line Dallas Semiconductor
DS1004 5-Tap High Speed Silicon Delay Line Dallas Semiconducotr

Other Datasheets by National Semiconductor (Texas Instruments)

Part Number Description
DS10BR150 1.0 Gbps LVDS Buffer / Repeater
DS10CP152 1.5 Gbps 2X2 LVDS Crosspoint Switch
DS10CP152Q Automotive 1.5 Gbps 2X2 LVDS Crosspoint Switch
DS10CP154 1.5 Gbps LVDS Crosspoint Switch
DS10CP154A 1.5 Gbps 4x4 LVDS Crosspoint Switch

Full PDF Text Transcription

Click to expand full text
DS10BR254 1.5 Gbps 1:4 LVDS Repeater December 14, 2007 www.DataSheet4U.com DS10BR254 1.5 Gbps 1:4 LVDS Repeater General Description The DS10BR254 is a 1.5 Gbps 1:4 LVDS repeater optimized for high-speed signal routing and distribution over FR-4 printed circuit board backplanes and balanced cables. Fully differential signal paths ensure exceptional signal integrity and noise immunity. The device has two different LVDS input channels and a select pin determines which input is active. A loss-of-signal (LOS) circuit monitors both input channels and a unique LOS pin is asserted when no signal is detected at that input. Wide input common mode range allows the switch to accept signals with LVDS, CML and LVPECL levels; the output levels are LVDS.
Published: |