Datasheet4U Logo Datasheet4U.com

DS3631 - CMOS Dual Peripheral Drivers

Description

The DS1631 series of dual peripheral drivers was designed to be a universal set of interface components for CMOS circuits Each circuit has CMOS compatible inputs with thresholds that track as a function of VCC (approximately VCC) The inputs are PNPs providing the high impedance necessary for interfa

📥 Download Datasheet

Datasheet preview – DS3631

📁 Similar Datasheet

  • DS3630-945GSE - Mini ITX Main Board Manual (Advansus)
  • DS36277 - Dominant Mode Multipoint Transceiver (Texas Instruments)
  • DS3647A - Quad Tri-state MOS Memory I/o Register (National Semiconductor Corporation)
  • DS3658 - Quad High Current Peripheral Driver (Texas Instruments)
  • DS3667 - 3 State Bidirectional Transceiver (National)
  • DS3680 - QUAD TELEPHONE RELAY DRIVER (Texas Instruments)
  • DS3690 - Three-Stateable Transmission Gate (Maxim Integrated Products)
  • DS36950 - Quad Differential Bus Transceiver (Texas Instruments)
  • DS36954 - Quad Differential Bus Transceiver (Texas Instruments)
  • DS3695A - Multipoint RS485/RS422 Transceivers (Texas Instruments)
Other Datasheets by National Semiconductor
  • DS3630B - Hex CMOS Compatible Buffer
  • DS3632 - CMOS Dual Peripheral Drivers
  • DS3633 - CMOS Dual Peripheral Drivers
  • DS3634 - CMOS Dual Peripheral Drivers
  • DS36149 - (DS36149 / DS36179) Hex MOS Drivers
  • DS36179 - (DS36149 / DS36179) Hex MOS Drivers
  • DS36276 - FAILSAFE Multipoint Transceiver
  • DS36277 - Dominant Mode Multipoint Transceiver

Full PDF Text Transcription

Click to expand full text
DS1631 DS3631 DS1632 DS3632 DS1633 DS3633 DS1634 DS3634 CMOS Dual Peripheral Drivers July 1992 DS1631 DS3631 DS1632 DS3632 DS1633 DS3633 DS1634 DS3634 CMOS Dual Peripheral Drivers General Description The DS1631 series of dual peripheral drivers was designed to be a universal set of interface components for CMOS circuits Each circuit has CMOS compatible inputs with thresholds that track as a function of VCC (approximately VCC) The inputs are PNPs providing the high impedance necessary for interfacing with CMOS Outputs have high voltage capability minimum breakdown voltage is 56V at 250 mA The outputs are Darlington connected transistors This allows high current operation (300 mA max) at low internal VCC current levels since base drive for the output transistor is obtained from the load i
Published: |