Datasheet4U Logo Datasheet4U.com

LM106 - Voltage Comparator

Datasheet Summary

Description

The LM106 series are high-speed voltage comparators designed to accurately detect low-level analog signals and drive a digital load.

They are equivalent to an LM710, combined with a two input NAND gate and an output buffer.

The circuits can drive RTL, DTL or TTL integrated circuits directly.

Features

  • n n n n n n Improved accuracy Fan-out of 10 with DTL or TTL Added logic or strobe capability Useful as a relay or lamp driver Plug-in replacement for the LM710 40 ns maximum response time © 1997 National Semiconductor Corporation DS007756 www. national. com 1 PrintDate=1997/05/07 PrintTime=10:34:16 6917 ds007756 Rev. No. 1 Proof 1 Schematic and Connection Diagrams DS007756-1 Metal Can DS007756-2 Note: Pin 4 connected to case. †Available per SMD# 8003701 Top View Order Number LM106H, L.

📥 Download Datasheet

Datasheet preview – LM106

📁 Similar Datasheet

  • LM10692 - Power Management Unit (Texas Instruments)
  • LM10 - Low Power Op Amp (Linear Technology)
  • LM10 - Operational Amplifier and Voltage Reference (Texas Instruments)
  • LM100 - Voltage Regulator (Intersil)
  • LM10000 - AVS System Controller (Texas Instruments)
  • LM1001-7R - 50 Watt AC-DC Converters (Power-One)
  • LM1001-7R - 50 Watt DC-DC Converters (Power-One)
  • LM10010 - VID Voltage Programmer (Texas Instruments)
  • LM10011 - 6/4-Bit VID Programmable Current DAC (Texas Instruments)
  • LM100SS1T522 - LCD Module (Sharp)
Other Datasheets by National Semiconductor
  • LM10 - Operational Amplifier/Voltage
  • LM100 - Voltage Regulator
  • LM1017 - 4-Bit Binary 7-Segment Decoder/Driver
  • LM101A - Operational Amplifiers
  • LM102 - LM102/LM302 Voltage Followers
  • LM1035 - DUAL DC OPERATED TONE/VOLUME BALANCE CIRCUITS
  • LM1036 - DUAL DC OPERATED TONE/VOLUME BALANCE CIRCUITS
  • LM104 - Negative Regulator

Full PDF Text Transcription

Click to expand full text
LM106/LM306 Voltage Comparator LM106/LM306 December 1994 LM106/LM306 Voltage Comparator General Description The LM106 series are high-speed voltage comparators designed to accurately detect low-level analog signals and drive a digital load. They are equivalent to an LM710, combined with a two input NAND gate and an output buffer. The circuits can drive RTL, DTL or TTL integrated circuits directly. Furthermore, their outputs can switch voltages up to 24V at currents as high as 10 mA. The devices have short-circuit protection which limits the inrush current when it is used to drive incandescent lamps, in addition to preventing damage from accidental shorts to the positive supply. The speed is equivalent to that of an LM710.
Published: |